Toshiba TDP-T420 Panduan Pemilik - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-T420. Toshiba TDP-T420 29 halaman. Brochure
Juga untuk Toshiba TDP-T420: Panduan Pemilik (29 halaman), Spesifikasi (2 halaman)
Lens and main unit cleaning
WARNING
•
Request cleaning and maintenance of a ceiling-mounted unit from your
projector dealership. Attempting to clean or replace the lamp in a high location by
yourself may cause you to fall, resulting in injury.
Lens cleaning
•
Clean the lens with a commercially available blower
and/or lens cleaner.
•
The lens is easily scratched, so do not rub it with hard
objects, or strike it.
Main unit cleaning
•
Unplug the power cord before cleaning the main unit.
•
Wipe dirt off the main unit gently with a soft cloth.
•
Do not wipe the main unit with a damp cloth. Doing
so may allow water to get inside, resulting in an
electric shock or unit failure.
•
Do not use benzene, thinner and the like as they
may deform or discolor the unit or damage the paint
surface.
•
Do not use a chemically saturated cloth.
48
Trouble indications
The indicator illuminates and a beep sound inform you of internal abnormalities.
No power
⇒
Problem with projector
(Off)
•
Unplug the power cord, and contact your dealer.
Lamp went out during use, or won't come on
⇒ Lamp temperature is high so that it is difficult to turn on, the
(Red lit)
lifetime of the lamp has ended or the projector is malfunctioning.
(Red flashing)
•
Unplug the power cord and wait for a short while, then turn the
Or
power back on.
•
If a lamp burns out, replace it with a new one.
(Red lit)
(Red lit)
Power went out during use
⇒ Internal overheating, or the outside temperature is too high.
•
Place the projector so that the air intake and exhaust are not
(Red lit)
(Red
blocked.
flashing)
•
Unplug the power cord and wait for a short while, then turn the
power back on.
The
icon will appear before the power goes out.
Power went out during use
⇒ Problem with internal cooling fan.
(Red lit)
•
Unplug the power cord, and contact your dealer.
(Green
The
icon will appear before the power goes out.
flashing)
Power went out during use, or power won't come on
⇒ The lamp cover is not properly attached.
(Red lit)
•
Unplug the power cord, and reattach the lamp cover.
(Orange
flashing)
Power went out during use
⇒ Problem inside the projector.
(Red lit)
•
Unplug the power cord and wait for a short while, then turn the
(Orange lit)
power back on.
Or
•
If the above action will not clear the problem, unplug the power
cord, and contact your dealer.
(Orange
The
icon will appear before the power goes out.
flashing)
Note
•
After there is an abnormal indication, the abnormal status remains until the main power
switch is turned off.
Others
p.45
49