Toshiba TLP TLP-X2000 Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TLP TLP-X2000. Toshiba TLP TLP-X2000 31 halaman. Brochure
Juga untuk Toshiba TLP TLP-X2000: Brosur & Spesifikasi (2 halaman), Spesifikasi (1 halaman)

Halaman Cetak

Placement

Placement Styles

As shown in the figures below, this device can be placed in 4 different styles.

The factory setting is "floor-mounted front projection." Set the [Projection mode] in the

Default setting 2 menu, in accordance with your needs.

Floor-mounted front projection

Ceiling-mounted front projection

WARNING

• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus

resulting in injury.

• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the

projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.

Improper mounting could cause the projector to fall, resulting in an accident.

• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let

everyone involved with the use of the projector know that fact.

Projection Distance and Size

Use the figures, tables, and formulas below to determine the projection size and projection

distance. (Projection sizes are approximate values for full-size picture with no keystone

adjustment.)

As seen from above

Screen

90°

As seen from the side

Lens center

90°

a is the distance (m) between the lens and the screen,

and corresponds to a range of 1.19 m to 9.13 m. H is the

height from the image bottom to the center of the lens.

p.43

Floor-mounted rear projection

Ceiling-mounted rear projection

projection size (inches) – 0.8786

a (min length) =

32.773

projection size (inches) – 0.7244

a (max length) =

27.248

projection distance a (m)

projection

height (H)

min length

max length

size (cm)

(zooming max) (zooming min)

33 (84)

–

1.19

40 (102)

1.19

1.44

60 (152)

1.80

2.18

80 (203)

2.41

2.91

100 (254)

3.02

3.64

150 (381)

4.55

5.48

200 (508)

6.08

7.31

250 (635)

7.60

9.15

300 (762)

9.13

–

Connection

Before connection

• Read the owner's manual of the device you are connecting to the projector.

• Some types of computer cannot be used or connected to this projector.

Check for an RGB output terminal, supported signal

• Turn off the power of both devices before connecting.

• The figure is a sample connection. This does not mean that all of these devices can or

must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Computer

(for control)

To audio output

White (L)/Red (R)

RS-232C

p.59

terminal

Control cable

AV cable

(not supplied)

To audio

output

To video

White (L)/

output

Red (R)

Video recorder, etc.

(cm)

6.0

7.3

10.9

14.5

18.1

27.2

36.3

45.4

54.4

p.57

, etc.

Video recorder,

Computer

DVD player, etc.

To S-video output

Audio cable

S-video cable

(not supplied)

To audio output

Audio cable

(not supplied)

Audio cable

(not supplied)

Audio cable

(not supplied)

To audio input

To audio

White (L)/Red (R)

output

Audio amplifier, etc.

DVD video recorder, etc.

Computer

To RGB

To audio

output

To RGB

Audio cable

output

(not supplied)

RGB cable

(not supplied)

(supplied)

Monitor

It is necessary to

switch to MONITOR

OUT by the switch.

p.18

Monitor cable Mini

D-sub 15P-BNC

(not supplied)

To Y/C

output

Green (Y)/Blue

)/Red (C

)

Conversion

adapter BNC-pin

(not supplied)