MSI RX1600XT-T2D256E Panduan Instalasi Cepat
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Kartu Video MSI RX1600XT-T2D256E. MSI RX1600XT-T2D256E 2 halaman. Pci express interface
Juga untuk MSI RX1600XT-T2D256E: Panduan Pengguna Cepat (2 halaman)
Halaman Cetak
TM
Next-Generation HYPER Z Technology
Hierarchical Z-Buffer with Early Z Test.
Lossless Z-Buffer Compression (up to 48:1).
Fast Z-Buffer Clear.
Z Cache optimized for real-time shadow rendering.
Optimized for performance at high display resolutions, up to and
Avivo Video and Display Engine
TM
New advanced video capabilities, including high fidelity gamma, color correction and scaling.
Dual independent display controllers that support true 30-bpp throughout the display pipe.
- Full symmetry on both heads.
- Each display controller supports display resolutions beyond 2560x1600.
Advanced DVI capabilities, including 10-bit, 16-bit HDR output.
YPrPb component output for direct drive of HDTV displays.
Seamless integration of pixel shaders with video in real time.
TM
VIDEOSOAP
noise removal filtering for captured video.
MPEG1/2/4 decode and encode acceleration.
- DXVA support.
- Hardware motion compensation, iDCT, DCT and color space conversion.
All-format DTV/HDTV decoding.
Adaptive per-pixel de-interlacing and frame rate conversion (temporal filtering).
TM
CrossFire
Support
Lossless Z-Buffer Compression (up to 48:1). Multi-GPU technology ready.
Four modes of operation.
- Alternate frame rendering for maximum performance.
- Supertiling for optimal load-balancing.
- Scissoring for compatibility.
- Super AA for maximum image quality.
H
ardware Installation
Follow the steps
below
to install the VGA card :
1. Remove the computer case.
2. Locate the PCI Express slot on your mainboard.
Warning: Inserting the VGA card into a wrong
slot may damage your card (refer to your mainboard
manual for more Information).
3. Put the card directly over the
PCI Express
slot
and press one end of the card into the slot first.
Gently but firmly press the other end until it is
fully seated in the slot.
4. Secure the card with a bracket screw.
5. Install all other cards and devices and connect
all the cables, and then install the case.
6. Connect the monitor. Now, you are ready to
install the software on your computer.
S
oftware Installation (for
To install the driver of the VGA card to your computer running
please follow the steps below:
including widescreen HDTV.
1. Turn on the computer.
2. Insert the
CD
into the CD-ROM drive. The Autorun program will start the Setup
program, and show the setup screen as follows:
3. Click ATi VGA Drivers. Follow the on-screen instructions to complete the
installation.
4. After finishing the installation, restart the computer as instructed.
I
TM
nstalling MSI Live Update 3
TM
TM
MSI
Live Update 3
is a useful utility for you to upgrade your MSI
VGA card. Thanks to the powerful capacity of this utility, you can conveniently
download and automatically update the BIOS and the drivers on-line, without spending
much time in searching many Web sites to find the BIOS or drivers you want.
Installing from the CD-Title
1. Insert the CD into the CD-ROM drive, and start the Setup program.
2. Click the Utility tab on the setup screen.
TM
3. Click the MSI
Live Update 3 . Follow the on-screen instructions to complete the
installation.
TM
Installing from the MSI
Web Site
1. Link to MSI's website at http://www.msi.com.tw
2. Select /Download/ VGA on the upper part of the MSI's homepage to enter
the Download page.
3. Select Utility under the selections of VGA on the left side of the web page.
R
Windows XP/ 2000
)
R
Windows XP or 2000,
Tip : If, on your computer, the
Autorun program does not execute
automatically, please 1) enable the
CD-ROM drive Auto-detect function
from Control Panel; or 2) find and
run the setup.exe file manually from
the CD.
TM
TM
mainboard and
TM
4. Find and click MSI Live Update to download the utility.
5. Unzip the downloaded utility first and then install this utility by clicking on LiveUpdate.exe.
6. Follow the on-screen instructions to complete the installation.
7. Launch MSI Live Update and to enter the main page of this utility as shown below.
TM
TM
The page of the MSI
Live Update 3
U
TM
TM
sing MSI Live VGA Driver Update
TM
TM
MSI
Live VGA Driver
Update
This service enables you to update the latest VGA driver for your VGA card.
TM
TM
TM
1. To update the MSI
Live VGA Driver , click Live VGA Driver
column of the main page.
2. This utility will start checking your platform and the information on the VGA card, and
display the information in a list.
3. Click the graph button on the bottom to connect MSI Live Update Series Server.
Then, it will automatically connect the Internet and compare the version of the driver
in the database.
4. It may take several minutes to detect the required drivers. Please wait while
proceeding detection.
5. Click the InstallShield Wizard button on the right side of the table to download and
update the driver. All actions will proceed automatically.
6. Follow the on-screen instructions to complete the updating procedure.
item on the left