Toshiba TLP-ET1U Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TLP-ET1U. Toshiba TLP-ET1U 50 halaman. 3lcd projector

Preparations

Preparing and using the remote control

Loading batteries into the remote control

Remove the battery cover.

Insert dry cell batteries.

Check the positive and negative terminals of

each battery to load it correctly.

Use two AAA (LR03 or R03) dry cell batteries.

Put back the battery cover.

G Dry cell batteries

• Remove the batteries from the remote control when it is not used for an extended period of time.

• If the remote control stops working or its controlling range decreases, replace all the batteries with new ones.

G The remote control

• The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent

lighting.

• Do not drop or bang it.

• Do not leave it in hot or humid locations.

• Do not get it wet or place it on top of wet objects.

• Do not take it apart.

• In rare cases, ambient conditions could impede the operation of the remote control. If this happens, point the

remote control at the main unit again, and repeat the operation.

Operating the remote control

Point the remote control toward the projector's

infrared remote sensor, and press a button on the

remote control.

• Operating the projector from the front

• Operating the projector from the rear

Approx. 15°