Toshiba TLP-S201 Panduan Pemilik - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TLP-S201. Toshiba TLP-S201 36 halaman. 3lcd data projector (xga / svga / high brightness / with pc card slot & document camera)

Halaman Cetak

Using the wireless LAN PC card (Continued)

Select the projector to be transmitted.

A list of the MAC addresses of the wireless LAN

PC cards

p.32

p.59

mounted on the projectors

that are available for transmission appears. If

projector name has been set up already, it is

shown instead of the MAC address. Select the

checkbox of the projector to be transmitted to from

this list. Then icon

is displayed on the

projector's screen for few seconds.

It is possible to select up-to four projectors.

Click on the

button.

The selected file's image is displayed by the projector.

Note

• Only one file can be sent at a time. To send another file, repeat steps

Operating the projector

This function can be used with any projector input.

Note, however, that this will not function with a memory PC card.

Launch the Wireless Utility software application.

The Screen Image transmission mode window appears on the computer's screen.

Click on the Remote Control

button

The Remote Control window

appears.

As the Wireless Utility window is still

displayed, you can operate the

projector via the Remote Control

window, while using the Wireless

Utility's functions.

While it is possible to use this function merely to operate the projector, closing the

Wireless Utility also closes the Remote Control window.

and

Select the projector to be operated.

In the Remote Control window, click on the

select the desired projector from the pull-down list.

Only one projector can be selected. (It is not possible to operate

multiple projectors.)

Then icon

is displayed on the projector's screen for few

seconds.

Click on the Remote Control window's buttons.

The function of each button and box is as follows:

Power On:

Turns projector power on.

Power Off:

Turns projector power off.

Note, however, that if Standby mode is set to Economy from the

Default setting menu

(Standby power consumption during Economy is about 6W.)

Input (box) :

Click on the

button, and select the desired input from the pull-down

list.

Mute:

Cuts off picture and sound. Click again to restore picture and sound.

Freeze:

The picture is paused. Click again to release the freeze function.

Volume (+/–) : Adjusting sound volume.

Resize (+/–) : Displays expanded image.

↑ ↑ ↑ ↑ ↑ /↓ ↓ ↓ ↓ ↓ /← ← ← ← ← /→ → → → → :

Moves expanded image.

Resize Off:

Restores picture to its original size.

To quit, click on the

button on the Remote Control window.

Performing this does not close the Wireless Utility window.

To exit both the Wireless Utility and the Remote Control, click on the

the Wireless Utility window.

button, and

p.53

, it is not possible to switch from off to on.

button on