Toshiba TLP-S201 Panduan Pemilik - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TLP-S201. Toshiba TLP-S201 36 halaman. 3lcd data projector (xga / svga / high brightness / with pc card slot & document camera)

Halaman Cetak

Using the document camera (Continued)

I Storing the camera images into the memory PC card

Models equipped with a PC card slot are able to save image data taken with the

document camera onto a memory PC card (sold separately) in JPEG format.

Mount a memory PC card into the PC card slot

Mounting a PC card will switch to PC card input if Input select mode is set to Auto on

the PC card setting menu

p.54

. In this case, press the CAMERA button on the

Camera control panel to switch to camera input.

Display the camera image, and press the STORE

IMAGE button.

A message appears on the screen, confirming that you wish to

save the image.

Press the

buttons to save the image.

(To not save the image, use the

Data save to the memory PC card begins.

The

icon will appear on the upper left of the screen during saving.

Never remove the memory PC card during a save. Doing so could corrupt your

data, or damage the PC card.

When the writing is complete, the icon disappears and a message appears informing

you that saving is complete, then disappears after a few seconds.

Repeat step

2 3

as necessary to store more images.

Check the saved file, if necessary.

Use the steps in "Projecting images stored in a memory PC card"

contents of the file or image. Images are saved in the memory PC card's _doccam

folder in JPEG format. If there is no _doccam folder, the images are created in the

memory PC card's root directory.

Notes

• Any adjustments other than CAMERA GAIN (+/–) and Sharpness will not be reflected

on a JPEG file saved on the memory PC card.

• It is not possible to photograph resized or frozen images.

• Saved files are saved with names in the range of pix001.jpg to pix999.jpg. If there is

already a file named pix999.jpg, no more files can be saved.

• The size of the file will vary, depending on the image. The number of files that can be

saved depends on the size of the files and the capacity of the memory PC card.

• Do not mount a write-protected memory PC card into the projector. It may become

impossible to access the memory PC card.

(Models equipped with PC card slot)

p.23

W.BALANCE

OVERLAY

LOCK

STORE

CAMERA

IMAGE

GAIN

buttons to select No, then press the

button.)

p.41

to check the

Operating a computer using the remote control

A computer can be operated using the projector's remote control. This function is available

on any computer with the Windows 98/98SE, Windows Me, Windows 2000, or Windows XP

OS, that is equipped with a USB port (The mouse remote control is not supported on OS 9

or OS X for the Macintosh).

Connecting a computer

Connect the projector to a computer using the supplied USB cable. See Fig. (1) below.

For models equipped with PC card slot, connect the supplied Mouse remote control

receiver to the computer. See Fig. (2) below.

(1)

ARM LIGHT

CAMERA

To USB port

USB

MONITOR

CONTROL

Operating a computer

The mouse remote control function is available when the remote control is set to [PC

Mode]. (See "Switching operation modes"

Point the remote control at the infrared remote sensor (in models using Mouse

remote control receivers, point it at the Mouse remote control receiver), and

operate the remote control's buttons.

G Moving the mouse pointer

Move the pointer control button in the direction that you wish the mouse pointer to

move, then press.

G To left click

Press the L-CLICK button.

G To right click

Press the R-CLICK button.

G To drag and drop

Move the pointer control button in a (L-)clicked state, then when the pointer is over

the desired location, release the button.

G Using the computer's up and down arrow key functions

Press the

Pointer control

R-CLICK

(2)

To USB port

COMPUTER

( Y,P

)

p.20

and

buttons to switch PowerPoint

slides.

Remote Control Front

Remote Control Rear

L-CLICK

VOL.-

VOL.+

PJ MODE

LASER

MENU / ENTER

R-CLICK

INPUT

Mouse remote

control receiver