Toshiba TLP711E Panduan Servis - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Servis untuk Proyektor Toshiba TLP711E. Toshiba TLP711E 30 halaman. 3 lcd data projector
Juga untuk Toshiba TLP711E: Manual Pelatihan Teknis (31 halaman)
Halaman Cetak
1-5. Inductor Indication
Unit
Tolerance
Type
1-6. Waveform and Voltage Measurement
• Measurement of waveform and voltage at each
section in the color circuits was conducted with
sufficient service color bar signal being received and
reproduced in normal conditions.
• Waveforms and voltage values for the remaining
circuit were measured with a broadcasting signal
normally received, so they may vary slightly accord-
ing to the programs being received. Use them as a
measure for servicing.
• All voltage values except the waveforms are ex-
pressed in DC and measured by a digital voltmeter.
........... Η
None
µ
........... µH
m
........... mH
None
........... ±5%
B
........... ±0.1%
C
........... ±0.25%
D
........... ±0.5%
F
........... ±1%
G
........... ±2%
K
........... ±10%
M
........... ±20%
PL
........... Peaking
For other, model name is described.
2-3
10µ
Type
Tolerance
Fig. 2-1-11