Dimplex XHD23L Panduan Servis - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Servis untuk Perapian Dalam Ruangan Dimplex XHD23L. Dimplex XHD23L 14 halaman.
Juga untuk Dimplex XHD23L: Panduan Pemilik (18 halaman), Panduan Servis (14 halaman), Panduan Servis (16 halaman)

Halaman Cetak

Heater

Heater is not turning on

Heater cuts out after a short time

Noise

Excessive noise when the heater is on

Excessive noise when flames are on

REV

PCN

DATE

1-888-346-7539 | www.dimplex.com

In keeping with our policy of continuous product improvement,

we reserve the right to make changes without notice.

Set temperature is below room tem-

perature

Heat is disabled; --- is displayed when

heat button is pressed

Defective heater assembly

Defective main control board

Inadequate air circulation

Buildup of dust/debris

Defective heater assembly

Buildup of dust/debris in the heater

assembly

Defective heater assembly

Flicker rod is hitting or rubbing against

internal component

Defective flicker motor

See operation instructions

Replace heater assembly

Replace main control board

Ensure that there is sufficient space

around the firebox. Install feet if nec-

essary.

Ensure that the exterior intake louvers

and firebox cavity are free of dust/

debris

Replace heater assembly

Ensure that the exterior intake louvers

and firebox cavity are free of dust/

debris

Replace heater assembly

Ensure that the flicker rod is straight

and mounted properly in the bracket;

and spinning freely away from other

components. Replace the flicker rod if

necessary.

Replace flicker motor