Croydex WS010731 Petunjuk Manual - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Perabotan Dalam Ruangan Croydex WS010731. Croydex WS010731 13 halaman. Chinnock vanity units

Halaman Cetak

Installation

Step 20

Installation

Drill the marked holes to a depth of 45mm.

Insert the wall plugs and loosely screw the

Step 21

Hang 'N' Lock into position through the

Hang 'N' Lock cams.

Installation

Step 23

Determine the desired location for the vanity unit.

Place the Hang 'N' Lock bracket underneath the panel at the

rear of the vanity unit.

With a pencil mark through the screw hole positions in each

cam recess and draw a reference line under the Hang 'N' Lock

bracket.

Remove the vanity unit and the Hang 'N' Lock bracket from the

wall surface prior to drilling.

Installation

Step 22

Ø8

Hang the vanity unit onto the Hang 'N' Lock bracket, checking

the unit is level and the support feet sit accurately in position.

Using a pencil mark through the support braces and remove the

vanity unit.

IMPORTANT!

The support braces provide additional reinforcement to support

the weight of the vanity unit and basin. Reinforcement screws

must be secured through the support braces to provide

additional strength.

With the Hang 'N' Lock bracket loosely

attached to the wall, adjust for height and

screwdriver and align the bottom of the

Hang 'N' Lock bracket with the reference

line. Once level fully tighten using a philips

screwdriver.

CAB 095 R03