Dimplex CAB15AR Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanas Dimplex CAB15AR. Dimplex CAB15AR 9 halaman. Compact air curtains
Juga untuk Dimplex CAB15AR: Manual (12 halaman), Manual (8 halaman)
Halaman Cetak
Thermostatic control (optional)
1) A thermostatic regulation valve with a remote sensing bulb
(not supplied) can be positioned in the supply water pipe-work to
regulate the heat output.
2) An electrical 3-Port Solenoid Valve can also be connected into
the system. Please contact your sales or service agent using the
contact details provided.
Door switch control (Water heated & Ambient
models)
By including a door switch in the circuit (as per 'D' in Fig. 9 the
air curtain will respond to door openings as follows:
(1) Door opening will energise the air curtain at the set conditions
(switch box settings).
(2) On door closure operation will continue at the set conditions
for a further 1 minute.
(3) Between 1 minute and 2 minutes from door closure ½ fan set
back operation will activate.
(4) After 2 minutes, the air curtain will return to a dormant state
until the door is re-opened. If the door re-opens during this 2
minute run on cycle, the process will re-start at (1).
Wiring Diagrams
CAB & DAB 'E' - Electric models - see Fig. 8
CAB & DAB 'W' / 'A' - Water heated & Ambient models - see
Fig. 9
C - Thermostat
D - Door Switch (Optional)
E - Thermal Safety Cut-out Circuit
F - Elements
-
BMS Switches (Optional)(S0,S1,S2)
M - Motor
Remote (BMS / BEMS) Operation
Connection to Building Energy Management Control Systems
(BEMS) is possible so that remote control of the air curtain can
be carried out in conjunction with other equipment. Please refer
to the table in Fig. 8 & 9 to make the appropriate connections to
the PCB.
Modular Connection
Refer to instructions provided with the modular linking kit.
De-rating the unit to operate at ½ heat setting
Please contact your sales or service agent using the contact
details provided.
Operation on a Single Phase Supply
Please contact your sales or service agent using the contact
details provided.