CRU DataPort 4 Bay Instal Manual - Halaman 2

Jelajahi secara online atau unduh pdf Instal Manual untuk Kandang CRU DataPort 4 Bay. CRU DataPort 4 Bay 2 halaman. Sata or sas enclosures with removable drive carriers

Halaman Cetak

Enclosure Setup Instructions

1. Power off the host computer.

2. Connect the host computer to the DataPort Enclosure with an exter-

nal multi-lane cable (not provided).

NOTE: CRU 2 Bay Enclosures only use two (2) of the four (4)

multilane host bus adapter connections.

3. Install hard drives in the removable carriers. See hard drive installa-

tion instructions for more details.

4. Insert the removable carriers into the enclosure and engage the lock

on the receive frames.

NOTE: The lock on both the DE110 and DP10 receiving frames

functions as both a lock and a DC power switch for the carrier

unit. The lock MUST be engaged in order to supply power to the

carrier and installed drive unit.

5. Power on the DataPort Enclosure with the power button located on

the lower right corner on the front of the enclosure. For best results

power on the enclosure prior to powering on the host system.

NOTE: The DataPort Enclosure supports hot swapping provided

the host bus adapter also supports that feature. When hot swap-

ping drives, ensure drive activity has stopped before powering

down the removable carrier.

Enclosure

Cooling Fan

SFF-8470

Connector

Power Supply

Cooling Fan

Figure 2: Enclosure Rear View

Rugged, Reliable, Mobile, Secure

Enclosures with LED Functions

Enclosure with DE110s

Enclosure with DP10s

Enclosure with DX115s

Product Warranty

CRU-DataPort (CRU) warrants the DataPort 2 Bay or 4 Bay SATA or SAS Enclosures with Removable Drive Car-

riers to be free of significant defects in material and workmanship for a period of one year from the original

date of purchase. CRU's warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other

warranties, including but not limited to, the implied warranties of merchantability and fitness for a particular

purpose and non-infringement of third-party rights with respect to the documentation and hardware. No CRU

dealer, agent or employee is authorized to make any modification, extension, or addition to this warranty. In

no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services,

lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or

incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or service,

even if CRU has been advised of the possibility of such damages. In no case shall CRU's liability exceed the

actual money paid for the products at issue. CRU reserves the right to make modifications and additions to

this product without notice or taking on additional liability.

FCC Certification

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC rules.

Operation is subject to the following two conditions:

A/C Power Plug

1. This device may not cause harmful interference, and

Power Supply

2. This device must accept any interference received; including interference that may cause undesired operation.

Power Switch

IT Power Systems

This enclosure is intended for use on a TN power system. This enclosure was evaluated for use on an IT

power system in accordance with Norway National Differences to IEC60950-1.

1-800-260-9800

www.CRU-DataPort.com

Drive ID LED

Drive Activity LED

Power Switch Lock

Enclosure Power LED

Enclosure Power Switch

Power LED

Activity LED

Power Switch Lock

Enclosure Power LED

Enclosure Power Switch

Power LED

Activity LED

Power Button

Key Lock

Enclosure Power LED

Enclosure Power Switch

A5-024-0007 Rev. 3.0