CRU Dataport DataPort 350 Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kandang CRU Dataport DataPort 350. CRU Dataport DataPort 350 2 halaman. Usb 2.0 and firewire enclosure
Juga untuk CRU Dataport DataPort 350: Panduan Pengguna (13 halaman)

Halaman Cetak

DataPortable 350 Installation Guide

Step 1

Step 2

Step 4

Step 5 & 6

Step 1. Pull out the rubber plugs from the sides of the enclosure.

Step 2. Remove the top cover of the enclosure

Step 3. Set your hard disk drive to master. Then connect the power and data cables.

Insert the hard drive back in the enclosure. Make sure the side mount holes on

the hard disk drive line up with the holes on the enclosure.

Step 4. Put the top cover back on to the enclosure.

Step 5. Secure the hard drive and the top cover with the screws.

Step 6. Put the rubber plugs back into position.