CRU Dataport RJR400 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kandang CRU Dataport RJR400. CRU Dataport RJR400 2 halaman. Removable 4-bay sata 3gb/s drive enclosure

Halaman Cetak
RJR400
Removable 4-Bay SATA 3Gb/s Drive Enclosure
Carrier
Safety
Eject
Lock
Front Panel
Carrier Eject: Push to eject carrier from the receiving frame (Figure 3).
Safety Lock: The safety lock assures proper seating of the drive
carrier within the receiving frame and prevents accidental ejection of
carrier. To lock, turn button 90° clockwise until horizontal. To unlock,
turn button 90° counterclockwise until vertical.
Power Switch (HD1 - HD4): Each drive carrier has its own power switch.
Drive Activity LED (HD1 - HD4): Each power switch acts as a Power
and Drive Activity LED.
NOTE: Drive Activity LED features supported by RJR400 Rev. C00
and up (rev. level can be found on P/N label located on the unit).
Steady GREEN glow indicates power ON.
Flashing AMBER indicates drive activity.
Fan LED: GREEN indicates normal fan operation. RED indicates fan
failure.
Overtemp LED/Reset: Flashing RED indicates overtemperature
conditions (default is 60° C) and a audible alarm will sound. Pushing
this switch will reset Overtemp LED back to Green, as well as turn off
audible alarm.
OverTemp LED
& Reset
Power Switch
& Power/Drive
Activity LED
Fan LED
Carrier Handle
Rugged, Reliable, Mobile, Secure
REAR PANEL
DC Power Connectors: Standard 4-pin DC Power Connector to
accept DC power.
NOTE: If using DC power, both DC power connectors
must be provided with power for proper operation.
SATA Power Connectors: Alternative 15-pin SATA Power Connector
to accept DC power.
NOTE: If using SATA power, both power connectors
must be provided with power for proper operation.
I/O Connectors: The input/output connector provides a standard
interface for all SATA signals.
Temperature Setting (JP1): Jumper set to 60
(default).
Reserved (JP3): Factory-reserved.
Fan Speed: High (recommended) and low speed. Jumper is set to
High (default).
NOTE: Fan speed feature supported by RJR400 Rev. C00
and up (rev. level can be found on P/N label located on
the unit).
Cooling Fan: Fan provides enhanced heat dissipation (53.9 CFM).
Temperature Setting (JP1)
Reserved
(JP3)
SATA
Power
Connectors
Fan Speed
DC Power Connectors
1-800-260-9800
o
C overtemperature
Cooling Fan
www.CRU-DataPort.com
TM
I/O
Connectors