CRU Dataport RTX111-3Q Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kandang CRU Dataport RTX111-3Q. CRU Dataport RTX111-3Q 9 halaman. Storage enclosure

CRU

f) Attach the Temperature Control Cooling Sensor to the top of the drive with an adhesive strip.

g) Replace the carrier cover and secure the screw on the rear of the carrier.

h) Slide the carrier into the RTX.

*A flashing green LED on the bay indicates bay fan failure. Call CRU technical support.

2.1.3 RTX115-3Q and RTX115DC-3Q

a) Slide the drive carrier out of the frame.

b) The carrier's cover is held in place by two screws—one on either side of the carrier. Remove these

screws then remove the cover.

c) Insert the drive into the carrier.

d) Mate the connection on the drive with the connection on the drive carrier circuit board.

e) Flip the drive/carrier assembly over, while holding the HDD in place. Secure the drive in place with

the provided screws.

f) Replace the drive cover and secure the screw on the rear of the carrier.

g) Slide the carrier into the frame assembly.

*Flashing red and blue LEDs on the bay indicate bay fan failure. Call CRU technical support.

2.2 Connecting and Powering RTX110-3Q

RTX-3Q can connect to your computer in one of several ways (eSATA, FireWire 800, USB 2.0 and USB

3.0). Choose one of those cables to use and plug it into the product. Connect the power cord to the

product and to a grounded electrical outlet.

USB 2.0 cable.

For models with encryption, ensure that the encryption key is inserted and that the lock on the bay is in

the 'locked" position.

Switch the product on. The drive will spin up automatically on RTX100-3Q and RTX115DC-3Q. The key

lock needs to be in the "locked" position for RTX Secure 110-3Q, RTX111-3Q, RTX Secure 111-3Q and

RTX112-3Q to spin up. For RTX115- 3Q, press the power button to spin up the drive.

Your RTX 1-Bay-3Q is now ready to use! If the hard drive is already formatted, it can be used right away.

If the hard drive is brand new, or its format is not compatible with your computer, the drive will need to be

formatted before being used.

3. Encryption Information (Secure model only)

• RTX-3Q with Encryption uses full disk hardware encryption to encrypt the entire contents of the

drive—including the boot sector, operating system and all files—without performance degradation.

• The Security Key must be installed prior to powering on the RTX-3Q with encryption for the data to

be decrypted on the drive. If the key is externally connected to the Mini-USB Security Key Port and is

not internally installed, then once it has been accepted, it may be removed and stored in a safe

location. Always store Security Keys apart from the data so that in the event that the drive is lost or

stolen, the data is protected.

• When a drive is formatted using an encryption key, the same or a duplicate key must be used in

order to access the data. There is no "back door" to access the data; lost keys make data

recovery virtually impossible.

R T X 1 - B a y - 3 Q U s e r M a n u a l A 9 - 1 1 0 - 0 0 0 1 R E V 2 . 0

NOTE: To connect RTX110-3Q to a USB 2.0 host, you must use a

- 4 -