Cruise N Comfort HD 24s Panduan Petunjuk Pemasangan & Pengoperasian

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan & Pengoperasian untuk Pendingin Udara Cruise N Comfort HD 24s. Cruise N Comfort HD 24s 7 halaman. 12 volt air conditioners
Juga untuk Cruise N Comfort HD 24s: Panduan Petunjuk Pemasangan dan Pengoperasian (11 halaman)

Halaman Cetak

Installation

1. Locate the area where the unit will be mounted and double check

that there are NO obstructions. Make sure that the location allows

for the cold air to return to the units evaporator.

2. Find a suitable location for the remote condenser. This condenser is

not designed to be in front of a radiator, it will block the air flow and

cause over heating. The remote condenser must be installed so air

can enter the front of the condenser and then is pulled thru the fan. It

is a good idea to have the fan toward the back of the vehicle so when

traveling down the road air can easily go thru the condenser. The

unit can be mounted standing up with the large port being higher

than the small port and the hose exiting out the side not the top.

Remote condenser can be laid almost flat, always maintain a

minimum of a 15 degree angle so that the large port is always higher

than the small.

Large port

Small port

Installation/Operating Instructions

HD 12/24 L/s 12Volt Air Conditioners

Page