ARIETE 578 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Blender ARIETE 578. ARIETE 578 17 halaman.

APPLIANCE DESCRIPTION (Fig. 1)

A Filler cap

B Lid

D Graduated goblet

D Blades

E Motor body

F Function panel

G Function selecting dial

H Operating time increase button (+)

Operating time decrease button (+)

L ON-OFF button

M Digital display

N Operating speed decrease button (-)

O Operating speed increase button (-)

P Pulse operation button

Q Connecting joint

R Food presser

HOW TO OPERATE

This appliance is equipped with a dual safety device, on the motor body (E) and on the lid (B).

The motor body safety device allows to stop the operation when the goblet is raised (C). The safety

device on the lid stops or prevents operation when the lid is not properly positioned on the goblet.

The lid is equipped with a hook that engages in the handle and that, connected to the motor body,

prevents the operation without a specific contact.

- Make sure the appliance is plugged in.

- Position the goblet (C) on the motor body (E), always with the handle in the position shown in Fig. 2,

matching the arrow on the goblet side with the one on the motor body.

- Cut fruit and vegetable into small pieces and place them into the goblet (C) adding water or milk.

The liquid ingredients must not exceed 1200 ml.

- Position the lid (B) on the goblet (C) so that the lid hook engages with the goblet handle and press

it slightly downwards until it locks in place (Fig. 3).

- Close the upper hole of the lid (B) by inserting the apposite cap (A) and rotating it clockwise (Fig.

4). Make sure the lid (B) and the cap (A) are properly inserted to prevent food from coming out

during the processing stages.

- Plug power cord into a socket. The function panel (F) and the function selecting dial (G) will light.

The ON-OFF button (L) will become red indicating that the appliance is ready.

- Press the ON-OFF button (L) and select one of the functions that can be seen on the function

panel (F) by rotating the apposite dial (G). The function icon will flash.

- Once having selected the required function, press the ON-OFF button (L) that will become green

and the appliance will run automatically:

- 4 -