Dimplex contempra ef KDS6401E Panduan Suku Cadang & Servis - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Suku Cadang & Servis untuk Kompor Dimplex contempra ef KDS6401E. Dimplex contempra ef KDS6401E 19 halaman. Dimplex - the glen dimplex group stove user's guide
Juga untuk Dimplex contempra ef KDS6401E: Panduan Pengguna Praktis (10 halaman), Panduan Suku Cadang & Servis (16 halaman)

Halaman Cetak

KDS6401E

If the stove was operating prior to servicing allow at least 10 minutes for light bulbs and

heating element to cool off to avoid accidental burning of skin.

Disconnect power before attempting any maintenance or cleaning to reduce the risk of

electric shock or damage to persons.

TO REPLACE POWER CORD

1. Remove the stove pipe kit (if equipped).

2. Remove the four screws from the rear panel and remove.

3. Locate and remove the wiring connections for the power cord.

4. With needle nose pliers grasp the power cord strain relief grommet from inside the

bottom cover and push while twisting to remove.

5. Pull the old power cord out through the bottom cover.

6. Install the new power cord through the hole in the bottom cover and connect all of

the wiring connections in their original locations.

7. Install the power cord retaining grommet on the power cord and insert into the hole

in the bottom cover.

8. Reassemble in the reverse order as above.