Crutchfield 016 0045 Lembar Master - Halaman 4

Jelajahi secara online atau unduh pdf Lembar Master untuk Sistem Stereo Mobil Crutchfield 016 0045. Crutchfield 016 0045 8 halaman. For dodge dakota

Halaman Cetak

016 0045

Front Door Speakers

1. Remove one (1) phillips screw from "sail panel".

2. Pry open screw cover behind door release

handle from rear edge of cover. Remove one (1)

Torx T25 screw.

3. Remove one (1) Torx T25 screw located behind

door pull handle.

4. Remove two (2) phillips screws from bottom edge

of door panel.

5. Lift door panel. Disconnect door release and

door lock linkage rods by rotating arm/clip and

lifting rods (Figure 1).

6. Disconnect wiring harnesses and remove door

panel.

7. Remove three (3) phillips screws securing

speaker. Pull out speaker, disconnect and

remove.

8. Connect speaker wiring harness of replacement

speaker to vehicle speaker connector. Using

factory speaker bracket, secure replacement

speaker to door as shown with screws previously

removed (Figure 2).

9. Test speaker operation and reinstall door panel

by reversing removal steps.

1-800-955-9094

Technical Service

(all body styles)

Door Release Handle

SAFETY CHECK

Check that wires do not interfere with window operation.

Test window and door lock operation.

NOTES:

• Instructions show factory size speakers or speakers

with adaptor brackets only. Cutting or fabricating (not

shown) will be required for other speaker sizes.

Screw Cover

Door Pull Handle

Door Panel

Factory Speaker Bracket

Please read first

Door Release Linkage Rod

(Door Lock Linkage Rod has

same appearance - one shown)

"Sail" Panel

FIGURE 1

Arm/Clip

FIGURE 2