Dimplex XLS12N Panduan Petunjuk Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pemanas Listrik Dimplex XLS12N. Dimplex XLS12N 8 halaman. Ultra-slim storage heaters
Juga untuk Dimplex XLS12N: Panduan Petunjuk Pengoperasian (10 halaman), Petunjuk Pengoperasian (4 halaman), Petunjuk Pengoperasian (4 halaman), Panduan Petunjuk Instalasi (8 halaman), Panduan Petunjuk Instalasi (8 halaman)

19. Carefully lift the bottom of the front inner skin panel

out of the retaining ﬂ ange at the base of the heater, taking

care not to damage the insulation attached to this panel.

22. Position the bottom rear layer of bricks with the recess

over the slots in the base insulation slab. Push the bricks

ﬁ rmly to the back of the heater, then ﬁ t the top row of

bricks.

20. Remove the internal packing by sliding it up and off

the elements, taking care not to damage the insulation.

21. Remove one element to allow access for the back

row of bricks. On the XL/XLS24N remove the element to

the right of centre, on the XL/XLS18N remove the central

element and on the XL/XLS12N remove the left hand

element. Loosen the two screws securing the element tails

in the ceramic block, and lift the element up and out of the

heater.

23. Replace the element which had been removed by

carefully passing the ends through the base insulation

slots into the terminal blocks below. Position the insulator

on the element end in contact with the terminal block

ceramic as shown, and tighten the connection screws. At

this point check that all element connections are tight.