Aeon Labs Minimote Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Kontrol Jarak Jauh Aeon Labs Minimote. Aeon Labs Minimote 7 halaman. Z-wave remote controller
Juga untuk Aeon Labs Minimote: Manual (7 halaman)

Halaman Cetak

Minimote Network Functions:

• Inclusion-Mode : Adding/Including Z-Wave Devices into the Z-Wave Network

1. Press the button labeled "Include" – The blue LED will blink slowly to indicate that

the Minimote has entered Inclusion-Mode.

2. Press the Z-Wave button on the product you wish you add into the network - The

blue and red LED will blink quickly to indicate detection of the Z-Wave device being

added.

3. The blue LED will stay solid for 2 seconds to indicate success; the red LED will stay

solid for 2 seconds to indicate failure.

4. Repeat step #2 for all products you wish to add into the Z-Wave network or press

any button on the Minimote to exit Inclusion-Mode. (The blue LED will be blinking

slowly as in step #1 while in Inclusion-Mode.)

Note: Secondary Controllers are not able to include Z-Wave products; the LED will stay

solid red for 2 seconds to signify this before exiting Inclusion-Mode.

• Removal-Mode : Deleting/Removing/Excluding Z-Wave Devices from the Z-Wave Network

1. Press the button labeled "Remove" – The red LED will blink slowly to indicate that

the Minimote has entered Removal-Mode.

2. Press the Z-Wave button on the product you wish you remove from the network -

The blue LED will stay solid for 2 seconds to indicate success; the red LED will stay

solid for 2 seconds to indicate failure.

3. Repeat step #2 for all products you wish to remove from the Z-Wave network or

press any button on the Minimote to exit Removal-Mode. (The red LED will be

blinking slowly as in step #1 while in Removal-Mode.)

Note: Secondary Controllers are not able to remove Z-Wave products; the LED will stay

solid red for 2 seconds to signify this before exiting Removal-Mode.