Aeon Labs Aeotec MULTISENSOR 6 Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Aeon Labs Aeotec MULTISENSOR 6. Aeon Labs Aeotec MULTISENSOR 6 14 halaman.
Juga untuk Aeon Labs Aeotec MULTISENSOR 6: Panduan Pengguna (11 halaman)
For a battery powered installation;
1. Remove the rear part of your sensor as shown in the previous
step 1.
2. Insert CR123A batteries oriented according to the picture below.
Your MultiSensor is now powered on.
Secondary battery
holder
Primary battery
holder
Note: If you just have only one CR123A battery, please insert the
battery into the primary battery holder.
Add your MultiSensor to your Z-Wave network.
It's now time to sync your MultiSensor with a Z-Wave network. The
following instructions explain how to do this using a Z-Stick or a
Minimote from Aeotec. If you're using an alternative controller for
your Z-Wave network, please refer to its user manual for network
inclusion instructions.
If you're using a Z-Stick:
4
THAT PORTION OF PRODUCTS WITH RESPECT TO WHICH DAMAGES
ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE
DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS
FROM AEON LABS'S DELIVERY, OR THE DATE FIXED FOR DELIVERY IN
THE EVENT OF NONDELIVERY.
THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU
OF ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER EXPRESS OR
IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
FCC NOTICE (for USA)
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO
THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
STORE INDOORS WHEN NOT IN USE. SUITABLE FOR DRY LOCATIONS.
DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED
TO WATER.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1
This device may not cause harmful interference, and
2
This device must accept any interference received, including
interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
21