Pioneer AVIC-5100NEX Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Mobil Pioneer AVIC-5100NEX. Pioneer AVIC-5100NEX 34 halaman. System firmware update instructions
Juga untuk Pioneer AVIC-5100NEX: Panduan Pembaruan Firmware (7 halaman), Panduan Pengoperasian (10 halaman)

Halaman Cetak

Section

Connection

Connecting the power cord (2)

Pink (CAR SPEED SIGNAL INPUT)

This product is connected here to detect the distance the vehicle travels. Always connect the

vehicle's speed detection circuit. Failure to make this connection will increase errors in the

vehicle's location display.

WARNING

IMPROPER CONNECTION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING

ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE VEHICLE´S

ANTILOCK BRAKING SYSTEM, AUTOMATIC TRANSMISSION AND SPEEDOMETER

INDICATION.

CAUTION

It is strongly suggested that the speed pulse wire be connected for accuracy of navigation

and better performance.

Note

The position of the speed detection circuit and the position of the parking brake switch

vary depending on the vehicle model. For details, consult your authorized Pioneer dealer

or an installation professional.

Light green (PARKING BRAKE)

Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply

side of the parking brake switch.

If this connection is made incorrectly or omitted, certain functions of this product will be

unusable.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS

DESIGNED TO DETECT PARKED STATUS AND

MUST BE CONNECTED TO THE POWER SUPPLY

SIDE OF THE PARKING BRAKE SWITCH.

IMPROPER CONNECTION OR USE OF THIS

LEAD MAY VIOLATE APPLICABLE LAW AND MAY

RESULT IN SERIOUS INJURY OR DAMAGE.

Power supply side

Ground side

Parking brake switch