Pioneer DEH-1610 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima Mobil Pioneer DEH-1610. Pioneer DEH-1610 36 halaman. High power cd player with fm/mw/lw tuner
Juga untuk Pioneer DEH-1610: Panduan Pengoperasian (36 halaman)

Halaman Cetak

Audio Adjustments

Adjusting loudness

Loudness compensates for deficiencies in the

low and high sound ranges at low volume.

Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the dis

play.

Press a to turn loudness on.

LOUD indicator is displayed.

# To turn loudness off, press b.

Press c or d to select a desired level.

Each press of c or d selects level in the fol

lowing order:

LOW (low)MID (mid)HI (high)

Note

You can also turn loudness on or off by pressing

LOUDNESS.

Front image enhancer (F.I.E.)

The F.I.E. (Front Image Enhancer) function is a

simple method of enhancing front imaging by

cutting mid and high range frequency output

from the rear speakers, limiting their output to

low range frequencies. You can select the fre

quency you want to cut.

Precaution

When the F.I.E. function is deactivated, the rear

speakers output sound of all frequencies, not just

bass sounds. Reduce the volume before disenga

ging F.I.E. to prevent a sudden increase in vo

lume.

Press AUDIO to select FIE.

Press AUDIO until FIE appears in the display.

Press a to turn F.I.E. on.

# To turn F.I.E. off, press b.

Press c or d to select a desired fre-

quency.

Each press of c or d selects frequency in the

following order:

100160250 (Hz)

Notes

! After turning the F.I.E. function on, use the bal

ance adjustment (refer to page 11) and adjust

front and rear speaker volume levels until they

are balanced.

! Turn the F.I.E. function off when using a 2

speaker system.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra

dical changes in volume when switching be

tween sources.

! Settings are based on the FM tuner volume

level, which remains unchanged.

Compare the FM tuner volume level

with the level of the source you wish to ad-

just.

Press AUDIO to select SLA.

Press AUDIO until SLA appears in the display.

Press a or b to adjust the source vo-

lume.

Each press of a or b increases or decreases

the source volume.

SLA +4 SLA 4 is displayed as the source vo

lume is increased or decreased.

Note

The MW/LW tuner volume level can also be ad

justed with source level adjustments.

Section