Pioneer DEH-4800BT Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Mobil Pioneer DEH-4800BT. Pioneer DEH-4800BT 33 halaman. Cd rds receiver
Juga untuk Pioneer DEH-4800BT: Panduan Pengoperasian (20 halaman), Panduan Memulai Cepat (33 halaman)

Halaman Cetak

DEH-X5800BT

DEH-4800BT

System remote control

Connect to blue/white cable.

Power amp (sold separately)

Connect with RCA cables (sold

separately)

To front output

Front speaker

To rear output or subwoofer output

Rear speaker or subwoofer

Installation

Important

• Check all connections and systems before

final installation.

• Do not use unauthorized parts as this

may cause malfunctions.

• Consult your dealer if installation requires

drilling of holes or other modifications to

the vehicle.

• Do not install this unit where:

– it may interfere with operation of the

vehicle.

– it may cause injury to a passenger as a

result of a sudden stop.

• The semiconductor laser will be damaged

if it overheats. Install this unit away from

hot places such as near the heater outlet.

• Optimum performance is

obtained when the unit is

installed at an angle of less

than 60°.

• When installing, to ensure proper heat

dispersal when using this unit, make sure

you leave ample space behind the rear

panel and wrap any loose cables so they

are not blocking the vents.

Leave ample

5 cm

space

5 cm

DIN mount installation

Insert the supplied mounting sleeve

into the dashboard.

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Mounting sleeve

• Make sure that the unit is installed

securely in place. An unstable

installation may cause skipping or

other malfunctions.

When not using the supplied

mounting sleeve

Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

Tighten two screws on each side.

Tapping screw (5 mm × 9 mm, not

supplied with product)

Mounting bracket

Dashboard or console

Removing the unit (installed with

the supplied mounting sleeve)

Remove the trim ring.

Trim ring

Notched tab

• Releasing the front panel allows easier

access to the trim ring.

• When reattaching the trim ring, point

the side with the notched tab down.

Insert the supplied extraction keys

into both sides of the unit until they

click into place.

Pull the unit out of the dashboard.

Installing the microphone

The microphone should be placed directly

in front of the driver at a suitable distance

to pick up their voice clearly.

CAUTION

It is extremely dangerous to allow the

microphone lead to become wound

around the steering column or shift lever.

Be sure to install the microphone in such a

way that it will not obstruct driving. It is

recommended to use the clamps (sold

separately) to arrange the lead.

To install on the sun visor

Fit the microphone lead into the

groove.

Microphone

lead

Groove

Install the microphone clip on the sun

visor.

Lowering the sun visor reduces the

voice recognition rate.

Microphone clip