Pioneer DEH-5250SD Panduan Instalasi

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Mobil Pioneer DEH-5250SD. Pioneer DEH-5250SD 8 halaman. Cd receiver
Juga untuk Pioneer DEH-5250SD: Panduan Pengoperasian (25 halaman)

Halaman Cetak

CD RECEIVER

RADIO CD

CD PLAYER

DEH-5250SD

Installation Manual

Manual de instalación

Manual de instalação

Printed in Thailand

<QRD3046-A/N> ES

Installation

English

2. Secure the mounting sleeve by

Note

using a screwdriver to bend the

• Check all connections and systems before final

metal tabs (90°) into place.

installation.

• Do not use unauthorized parts. The use of

Dashboard

unauthorized parts may cause malfunctions.

• Consult with your dealer if installation requires

drilling of holes or other modifications of the

vehicle.

• Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

• The semiconductor laser will be damaged if it

overheats. Install this unit away from hot places

such as near the heater outlet.

• Optimum performance is obtained when the unit is

Mounting sleeve

installed at an angle of less than 60°.

60°

3. Install the unit as illustrated.

Use commercially available parts when

installing.

• When installing, to ensure proper heat dispersal

Nut

when using this unit, make sure you leave ample

space behind the rear panel and wrap any loose

Firewall or

cables so they are not blocking the vents.

metal support

DIN front/rear mount

Metal strap

Screw

This unit can be properly installed either from

"Front" (conventional DIN front-mount) or

"Rear" (DIN rear-mount installation, utilizing

threaded screw holes on the sides of unit

Screw (M4 8)

chassis). For details, refer to the following

installation methods.

DIN Front-mount

1. Insert the mounting sleeve into the

• Make sure that the unit is installed securely

dashboard.

in place. An unstable installation may cause

For installation in shallow spaces, use the

skipping or other malfunctions.

supplied mounting sleeve. If there is enough

space, use the mounting sleeve that came with

the vehicle.

Installation

English

DIN Rear-mount

3. Pull the unit out of the dashboard.

1. Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

2. Tighten two screws on each side.

Truss screw (5 mm × 8 mm)

Mounting bracket

Dashboard or Console

Removing the unit

1. Extend top and bottom of the trim

ring outwards to remove the trim

ring. (When reattaching the trim

ring, point the side with the groove

down.)

Trim ring

• Releasing the front panel allows easier access

to the trim ring.

2. Insert the supplied extraction keys

into both sides of the unit until

they click into place.