Pioneer MVH-X285FD Panduan Servis - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Servis untuk Penerima Mobil Pioneer MVH-X285FD. Pioneer MVH-X285FD 44 halaman. Rds media center receiver

Halaman Cetak

1. SERVICE PRECAUTIONS

1.1 SAFETY PRECAUTIONS

 You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and

should keep the safety during servicing by following the safety instructions described in this manual.

 Please keep the distance of more than 13 cm from focus lens for safety when you check pickup and make adjustment,

and do not look straight at Laser Beam for more than 10 seconds.

1.2 NOTES ON DISASSEMBLY / ASSEMBLY

 Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on

mode may damage the ICs inside the unit.

 Please be sure to conduct line process to original status if you make assembling after repair.

1.3 NOTES ON REPLACING PARTS

 Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic

induction.

 Please be careful of not to apply static charge onto integrated circuits, etc, when you conduct repair work.

Especially, please use soldering iron with its tip grounded.

Also, please use a pair of tweezers with static charge protection capability if there is the possibility of contacting to

device terminals, and avoid the use of metal-made tweezers.

1.4 NOTES ON ADJUSTMENT

 Some of the adjustment is required when the part is replaced.

Pease refer to "8. EACH SETTING AND ADJUSTMENT".

1.5 OTHERS

Notes on soldring

For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.

Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for

repairs accompanied by reworking of soldering.

MVH-280FD/XNEW5