Pioneer MVH-X360BT Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Mobil Pioneer MVH-X360BT. Pioneer MVH-X360BT 26 halaman.
Juga untuk Pioneer MVH-X360BT: Panduan Servis (46 halaman)

Halaman Cetak

Using this unit

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, NOT FOUND is displayed.

2 Turn M.C. to select a device from the device

list.

! If the desired device is not displayed, select

RE-SEARCH.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the de-

vice name (Pioneer BT Unit) and enter the

PIN code on your device.

! PIN code is set to 0000 as the default. You

can change this code.

! A 6-digit number may display on both this

unit and the Bluetooth device.

Select yes if the 6-digit numbers displayed

on this unit and the Bluetooth device are

the same.

! 6-digit number appears on the display of

this unit. Once the connection is estab-

lished, this number disappears.

! If you are unable to complete the connec-

tion using this unit, use the device to con-

nect to the unit.

! If three devices are already paired, DEVICE-

FULL is displayed and it is not possible to

perform this operation. In this case, delete

a paired device first.

A. CONN (connecting to a Bluetooth device auto-

matically)

1 Press M.C. to turn automatic connection on or

off.

VISIBLE (setting the visibility of this unit)

Bluetooth visibility can be turned on so that other

devices can discover the unit.

1 Press M.C. to turn the visibility of this unit on

or off.

PIN CODE (PIN code input)

You must enter a PIN code on your device to con-

firm the Bluetooth connection. The default code is

0000, but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you

to the PIN code input display, and you can

change the PIN code.

DEV. INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Turn M.C. to display the device information.

Device name—Bluetooth device address

GUEST MODE (guest mode)

When this mode is turned on, if a pairing is at-

tempted while there are already three devices

paired together, the unit will move to the DEL DE-

VICE screen automatically and prompt you to de-

lete a device. For details, refer to DEL DEVICE

(deleting a device from the device list) on page 10.

1 Press M.C. to turn the guest mode on or off.

A. PAIRING (auto pairing)

If this function is turned on while there is an

iPhone connected to the unit by USB, you will be

automatically prompted to pair the unit and

iPhone.

1 Press M.C. to turn auto pairing on or off.

! This function may not be available depending

on what version of iOS you are using.

Using this unit

Phone menu operation

Press

to display the phone menu.

Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

MISSED (missed call history)

DIALED (dialed call history)

RECEIVED (received call history)

1 Press M.C. to display the phone number list.

2 Turn M.C. to select a name or phone number.

3 Press M.C. to make a call.

PHONE BOOK (phone book)

The contacts on your phone will normally be trans-

ferred automatically when the phone is con-

nected. If it is not, use your phone menu to

transfer the contacts. The visibility of this unit

should be on when you use the phone menu.

Refer to VISIBLE (setting the visibility of this unit)

on page 11.

1 Press M.C. to display SEARCH (alphabetical

list).

2 Turn M.C. to select the first letter of the name

you are looking for.

3 Press M.C. to display a registered name list.

4 Turn M.C. to select the name you are looking

for.

5 Press M.C. to display the phone number list.

6 Turn M.C. to select a phone number you want

to call.

7 Press M.C. to make a call.

PRESET1-6 (preset phone numbers)

Black plate (11,1)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired preset number.

3 Press M.C. to make a call.

! You can also use the preset number buttons 1/

to 6/

to recall a preset phone number.

For more details about storing phone num-

bers, refer to Storing and recalling phone num-

bers on page 10.

PHONE FUNC (phone function)

You can set A. ANSR, R.TONE and PB INVT from

this menu. For details, refer to Function and opera-

tion on page 11.

Function and operation

Display PHONE FUNC.

Refer to PHONE FUNC (phone function) on page

11.

Press M.C. to display the function menu.

Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

A. ANSR (automatic answering)

1 Press M.C. to turn automatic answering on or

off.

R.TONE (ring tone select)

1 Press M.C. to turn the ring tone on or off.

PB INVT (phone book name view)

1 Press M.C. to invert the order of names in the

phone book.

<QRD3221-B>11

Section