Pioneer MVH-X460UI Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Mobil Pioneer MVH-X460UI. Pioneer MVH-X460UI 41 halaman. Digital media receiver

Halaman Cetak

Installation

DIN Front-mount

Insert the mounting sleeve into the dash-

board.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough space,

use the mounting sleeve that came with the ve-

hicle.

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°) into

place.

1 Dashboard

2 Mounting sleeve

# Make sure that the unit is installed securely in

place. An unstable installation may cause skipping

or other malfunctions.

DIN Rear-mount

Line up the holes on the mounting brack-

et with the holes on the sides of the unit to

attach the bracket.

Screw in one screw on each side to hold

the unit in place.

1 Tapping screw (5 mm × 8 mm)

2 Mounting bracket

3 Dashboard or console

Using the included bracket

You can also use the included bracket to mount

the unit. Check to make sure that the included

bracket matches your particular model of ve-

hicle and then attach it to the unit as shown

below.

1 Screw

2 Bracket

Installation

Removing the unit

Remove the trim ring.

1 Trim ring

2 Notched tab

! Releasing the front panel allows easier ac-

cess to the trim ring.

! When reattaching the trim ring, point the

side with the notched tab down.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Removing and re-attaching the

front panel

You can remove the front panel to protect your

unit from theft.

For details, refer to Removing the front panel and

Re-attaching the front panel on page 4.

Section