Pioneer NC-50DAB Buku Petunjuk - Halaman 33

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Penerima Mobil Pioneer NC-50DAB. Pioneer NC-50DAB 42 halaman. Network cd receiver

> Before Start

> Part Names

Factory Reset

Reset the settings of this unit to the status at the time of shipment. We recommend that you

take a note of the settings you have changed before going ahead with a factory reset. Select

"Start" and confirm to go ahead. The unit will be placed on standby automatically when

initializing is completed.

Update

"Update" is not displayed if there are no firmware updates.

■ via Network

Press ENTER to select when you want to update the firmware via network.

■ via USB

Press ENTER to select when you want to update the firmware via USB.

Web Setup

You can make Wi-Fi connection settings using a web browser on a computer. Be sure your

computer is connected to the router wirelessly. If this unit is connected to the router using

ethernet cable, you can not do this setting.

1. Turn the unit on.

2. Press SETUP on the remote controller, select "Wi-Fi" in "Network Setting" - "Connection",

then select "Wi-Fi Setup".

3. Press /

to select "Use iOS Device" and press ENTER.

4. In the list of wireless LAN connections on your computer, select SSID of this unit

(softap_0009B0xxxxxx).

0 "xxxxxx" in SSID is the lower three bytes of the MAC address.

5. Open the web browser on your computer and access http://192.168.200.1.

6. The "Web Setup" menu is displayed. Make network settings for this unit.

0 Depending on the equipment being used or connection environment, this function may

not work.

0 Consult the appropriate operating instructions for information regarding operation of the

computer.

0 Since this kind of connection is not encoded, a minor security risk may be involved.

> Install

> Initial Setup

> Playback

Advanced Setup

| Firmware Update | Others