Pioneer SPH-10BT Petunjuk Pembaruan Firmware - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Pembaruan Firmware untuk Penerima Mobil Pioneer SPH-10BT. Pioneer SPH-10BT 4 halaman. Smartphone receiver
Juga untuk Pioneer SPH-10BT: Panduan Instalasi (33 halaman), Panduan Pengoperasian (35 halaman), Petunjuk Pembaruan Firmware (6 halaman), Petunjuk Pembaruan Firmware Sistem (7 halaman)

if Pioneer Smart Sync is connected, please disconnect.

Press and hold Application launch to display the Initial menu.

Press ">" repeatedly to select "UPDATE", next press the Application Launch button to confirm.

Select the "START" item for updating the unit to the latest software.

7. The "CHECK FILE" screen appears.

If it shows "ERROR" on the display, Try the following

"FILE ERR->CHK USB" Confirm that the firmware file is correct, next restart the update or

change to a new USB memory.

8. After starting, there will be a progress bar while updating.

display, try the following:

press the Application Launch button

9. Wait until the update procedure completes. (approx. 5 minutes)

10. The product will reboot after the update is finished. Do not touch anything even when the

screen is blacked out. After it has finished rebooting, the screen will return to the menu

screen.

11. The firmware update is now complete. Your Pioneer Smartphone Receiver is now ready for

use.

"ERR->RETRY" Disconnect / connect the USB storage device. And

to restart the update.

If it shows "ERROR" on the