Pioneer Super Tuner IIID DEH-P5000UB Panduan Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penerima Mobil Pioneer Super Tuner IIID DEH-P5000UB. Pioneer Super Tuner IIID DEH-P5000UB 4 halaman. Pioneer deh-p5000ub: install guide
Connecting the unit
English
When not connecting a rear speaker leard to a subwoofer
1.5 m (4 ft. 9 in.)
20 cm
(7-7/8 in.)
USB cable
AUX jack (3.5 φ)
Connect to separately sold USB device.
Use a stereo mini plug
This product
Antenna jack
cable to connect with
auxiliary device.
Front output
Wired remote input
Hard-wired remote control adaptor can
Rear output
be connected (sold separately).
Subwoofer output
IP-BUS input (Blue)
Fuse (10 A)
Multi-CD player
IP-BUS cable
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
Yellow/black
ignition switch (12 V DC).
If you use an equipment with Mute function,
Orange/white
wire this lead to the Audio Mute lead on that
equipment. If not, keep the Audio Mute lead
Connect to lighting switch terminal.
free of any connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
White
Gray
Front speaker
Front speaker
White/black
Gray/black
Left
Right
Green
Violet
Rear speaker
Rear speaker
Green/black
Violet/black
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Connecting the unit
English
Power amp
(sold separately)
To rear output
Connect with RCA cables
(sold separately)
Power amp
(sold separately)
To front output
Power amp
(sold separately)
To subwoofer
output
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Perform these connections
when using the optional
amplifier.
Subwoofer
Subwoofer
Front speaker
Front speaker
Rear speaker
Rear speaker
Connecting the unit
English
When using a subwoofer without using the optional amplifier
1.5 m (4 ft. 9 in.)
USB cable
Connect to separately sold USB device.
This product
Antenna jack
Front output
Rear output
Subwoofer output
Fuse (10 A)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Note:
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Connecting the unit
20 cm
(7-7/8 in.)
AUX jack (3.5 φ)
Use a stereo mini plug
cable to connect with
auxiliary device.
Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
IP-BUS input (Blue)
Multi-CD player
IP-BUS cable
(sold separately)
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
White
Gray
Front speaker
White/black
Gray/black
Left
Green
Violet
Subwoofer (4 Ω)
Green/black
Violet/black
When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Green
Violet
Not used.
Green/black
Violet/black
English
Front speaker
Right
Subwoofer (4 Ω)
Subwoofer
(4 Ω) 2