Pioneer Super Tuner IIID DEH-P5800MP Panduan Pengoperasian - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima Mobil Pioneer Super Tuner IIID DEH-P5800MP. Pioneer Super Tuner IIID DEH-P5800MP 38 halaman. Owner's manual
Juga untuk Pioneer Super Tuner IIID DEH-P5800MP: Panduan Instalasi (6 halaman), Panduan Pemilik (34 halaman)
Halaman Cetak
MP3/WMA/WAV Player
Introduction of advanced built-in CD player (MP3/WMA/
WAV) operation
Function display
Shows the function status.
RPT indicator
Shows when repeat range is
selected to current track (file).
* Press FUNCTION to display the function names.
Press FUNCTION repeatedly to switch between the following functions:
RPT (repeat play) – RDM (random play) – SCAN (scan play) – PAUSE (pause) –
COMP (compression and BMX) – FF/REV (search method)
• To return to the playback display, press BAND.
Note
• If you do not operate the function within about 30 seconds, the display is automatically
returned to the playback display.
Repeating play
For MP3/WMA/WAV playback, there are three repeat play ranges: FLD (folder
repeat), TRK (one-track repeat) and DSC (repeat all tracks).
1. Press FUNCTION to select RPT.
Press FUNCTION until RPT appears in the display.
2. Press 4 or 6 to select the repeat range.
Press 4 or 6 until the desired repeat range appears in the display.
• FLD – Repeat the current folder
• TRK – Repeat just the current track
• DSC – Repeat all tracks
Notes
• If you select another folder during repeat play, the repeat play range changes to DSC.
• If you perform track search or fast forward/reverse during TRK, the repeat play range
changes to FLD.
• When FLD is selected, it is not possible to play back a subfolder of that folder.
Playing tracks in random order
Random play lets you play back tracks in a random order within the repeat range, FLD
and DSC.
1. Select the repeat range.
Refer to "Repeating play" on this page.
2. Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the display.
3. Press 8 to turn random play on.
RDM :ON appears in the display. Tracks will play in a random order within the
previously selected FLD or DSC ranges.
4. Press 2 to turn random play off.
RDM :OFF appears in the display. Tracks will continue to play in order.
Note
• If you turn random play on during FLD and then return to the playback display, FRDM
appears in the display.
Scanning folders and tracks
While you are using FLD, the beginning of each track in the selected folder plays for
about 10 seconds. When you are using DSC, the beginning of the first track of each
folder is played for about 10 seconds.
1. Select the repeat range.
Refer to "Repeating play" on this page.
2. Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the display.
3. Press 8 to turn scan play on.
SCAN :ON appears in the display. The first 10 seconds of each track of the current
folder (or the first track of each folder) is played.
4. When you find the desired track (or folder) press 2 to turn scan play off.
SCAN :OFF appears in the display. The track (or folder) will continue to play.
• If the display has automatically returned to the playback display, select SCAN again
by pressing FUNCTION.
Notes
• After track or folder scanning is finished, normal playback of the tracks will begin again.
• If you turn scan play on during FLD and then return to the playback display, FSCN appears
in the display.
19