Pioneer Super Tuner IIID DEH-P5800MP Panduan Pengoperasian - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima Mobil Pioneer Super Tuner IIID DEH-P5800MP. Pioneer Super Tuner IIID DEH-P5800MP 38 halaman. Owner's manual
Juga untuk Pioneer Super Tuner IIID DEH-P5800MP: Panduan Instalasi (6 halaman), Panduan Pemilik (34 halaman)
Halaman Cetak
Other Functions
Using the AUX source
An IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) lets
you connect this unit to auxiliary equipment featuring RCA output. For more details,
refer to the IP-BUS-RCA Interconnector owner's manual.
Selecting AUX as the source
* Press SOURCE to select AUX as the source.
Press SOURCE until AUX appears in the display.
• If the auxiliary setting is not turned on, AUX cannot be selected. For more details,
see "Switching the auxiliary setting" on page 30.
Setting the AUX title
The title displayed for the AUX source can be changed.
1. After you have selected AUX as the source, press FUNCTION and hold until
TITLE IN appears in the display.
2. Press 8 or 2 to select a letter of the alphabet.
Each press of 8 will display a letter of
the alphabet in A B C ... X Y Z, numbers
and symbols in 1 2 3 ... > [ ] order. Each
press of 2 will display a letter in the
reverse order, such as Z Y X ... C B A
order.
3. Press 6 to move the cursor to the next character position.
When the letter you want is displayed, press 6 to move the cursor to the next position
and then select the next letter. Press 4 to move backwards in the display.
4. Move the cursor to the last position by pressing 6 after entering the title.
When you press 6 one more time, the entered title is stored in memory.
5. Press BAND to return to the playback display.
Additional Information
Understanding built-in CD player error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to
record the error message.
Message
Cause
ERROR-11, 12, 17, 30
Dirty disc
ERROR-11, 12, 17, 30
Scratched disc
ERROR-15
The inserted disc does not
contain any data
ERROR-10, 11, 12, 15,
Electrical or mechanical
17, 30, A0
ERROR-22, 23
The CD format cannot be
played back
ERROR-44
All tracks are skip tracks
HEAT
CD player overheated
Sound muting
Sound from this unit is muted automatically in the following cases:
• When a call is made or received using a cellular telephone connected to this unit.
• When the voice guidance is output from a Pioneer navigation unit connected to this
unit.
The sound is turned off, MUTE is displayed and no audio adjustments, except volume
control, are possible. Operation returns to normal when the phone connection or the
voice guidance is ended.
CD player and care
• Use only CDs that have either of the two Compact Disc Digital Audio marks as
shown below.
32
Action
Clean disc.
Replace disc.
Replace disc.
Turn the ignition ON and OFF, or
switch to a different source, then back
to the CD player.
Replace disc.
Replace disc.
Turn off the CD player until the CD
player cools down.