Pioneer AVH-291BT Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Pioneer AVH-291BT. Pioneer AVH-291BT 45 halaman. Dvd rds av receiver
Juga untuk Pioneer AVH-291BT: Panduan Pemilik (49 halaman)

Halaman Cetak
Pioneer AVH-291BT Panduan Pemilik
Precaution
 Checking part names and functions on page 7
Settings and recorded contents are reset to the factory settings.

About this manual

This manual uses diagrams of actual screens to describe opera-
tions. However, the screens on some units may not match those
shown in this manual depending on the model used.
Meanings of Symbols Used in This
Manual
This indicates model name that are supported
000BT
the described operations.
This indicates to touch an appropriate soft key
on the touch screen.
This indicates to touch and hold an appropriate
HOLD
soft key on the touch screen.
This indicates that there is a reference or
supplementary for the key or screen.

Basic operation

Checking part names and
functions
7
8
1
2
3
4
5
6
 Resetting the microprocessor on page 6
1
RESET
button
2
Volume (+/–) button
3
MUTE
Press to switch the mute setting to on or off.
button
4
Press to switch the display between the top
button
menu screen and the current source screen.
5
DISP
Press to turn the display on or off.
button
6
Performs manual seek tuning, fast forward,
TRK (
reverse and track search controls.
/
)
Press to answer or end a call.
button
7
button
8
Disc-
 Inserting and ejecting a disc on page 7
loading
slot
9
LCD screen

Remote control

The remote control CD-R33 is sold separately.
For details concerning operations, see the remote control
manual.
Inserting/ejecting/connecting
media
CAUTION
9
Do not insert anything other than a disc into the disc-loading
slot.
Inserting and ejecting a disc
Inserting a disc
1 Insert a disc into the disc-loading slot.
Ejecting a disc
1 Press
button to eject a disc.
Plugging and unplugging a USB stor-
age device
p This product may not achieve optimum performance with
some USB storage devices.
p Connection via a USB hub is not possible.
p A USB cable is required for connection.
1 Pull out the plug from the USB port of the USB
cable.
2 Plug a USB storage device into the USB cable.
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the
USB storage device.

On first-time startup

1 Start the engine to boot up the system.
1
2
7