Pioneer DCS-370 Panduan Petunjuk Pengoperasian - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Pioneer DCS-370. Pioneer DCS-370 48 halaman. Pioneer dvd receiver operating instructions
09
Other connections
Chapter 9
Other connections
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Only use the included AM loop antenna.
Indoor
antenna
(vinyl-coated
wire)
For an external FM antenna, use a PAL
connector to hook up an external FM antenna.
Connecting auxiliary audio
components
Using the stereo analog inputs, you can
connect an external component such as a tape
deck or MD player for playback through this
system.
Note
1 SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment below).
32
En
Outdoor antenna
AM LOOP
5 m to 6 m
PAL connector
Tape deck, etc.
To audio
output
LINE 2
IN
L
LINE 1
AV CONNECTOR
R
VIDEO
OUT
•
Connect the (LINE 2) AUDIO IN jacks to
the analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
Using the SCART AV output
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
•
Use a commercially available SCART cable
to connect the (LINE 1) AV CONNECTOR to
your TV.
To SCART
input
75 Ω
VIDEO
LINE
R
L
FRONT
CENTER
OUT
CONTROL
L
OUT
R
SUB
R
L
SURROUND
WOOFER
AUDIO
SPEAKERS (4 Ω - 6 Ω)
TV
LINE 2
LINE
IN
OUT
CONTROL
L
L
LINE 1
OUT
AV CONNECTOR
R
R
AUDIO
OUT
1