Pioneer DEH-P7400HD Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Pioneer DEH-P7400HD. Pioneer DEH-P7400HD 39 halaman. Cd rds receiver

Halaman Cetak

Section

Operating this unit

Storing the tag information to this unit

1 Tune in to the broadcast station.

2 Press and hold M.C. if TAG is indicated in the

display while desired song is broadcasting.

! While storing the tag data on this unit,

TAG flashes.

Storing the tagged information to your iPod

1 Connect the iPod to this unit and transfer this

unit's tag information to the iPod.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

BSM (best stations memory)

BSM (best stations memory) automatically stores

the six strongest stations in the order of their sig-

nal strength.

1 Press M.C. to turn BSM on.

To cancel, press M.C. again.

Local (local seek tuning)

Local seek tuning lets you tune in to only those

radio stations with sufficiently strong signals for

good reception.

1 Press M.C. to select the desired setting.

FM: OFF—Level 1—Level 2—Level 3—Level

AM: OFF—Level 1—Level 2

The highest level setting allows reception of

only the strongest stations, while lower levels

allow the reception of weaker stations.

Seek mode (seek mode)

Seek tuning setting can be changed between digi-

tal station seek (Seek HD) and all station seek

(Seek ALL) depending on the reception status.

1 Press M.C. to select your favorite setting.

Seek ALL—Seek HD

Blending (reception mode)

If a digital broadcast reception condition gets

poor, this unit automatically switches to the ana-

log broadcast of the same frequency level. If this

function is set to on, the tuner switches between

digital broadcast and analog broadcast automati-

cally. If this function is off, reception will be con-

ducted within an analog broadcast.

1 Press M.C. to turn this function on or off.

Note

If Seek mode is set to Seek HD and Blending is

set to off, the tuner cannot receive broadcasts.

In this case, the seek mode or reception mode is

changed automatically as follows:

! When Seek mode is set to Seek HD, if you

switch Blending from on to off, Seek mode is

changed to Seek ALL.

! When Blending is set to off, if you switch

Seek mode from Seek ALL to Seek HD,

Blending is changed to on.

CD/CD-R/CD-RW and USB

storage devices

Basic operations

1 Bit rate/sampling frequency indicator

Operating this unit

Shows the bit rate or sampling frequency of

the current track (file) when the compressed

audio is playing.

! When playing back VBR (variable bit

rate)-recorded AAC files, the average bit

rate value is displayed. However, depend-

ing on the software used to decode AAC

files, VBR may be displayed.

2 Folder number indicator

Shows the folder number currently playing

when the compressed audio is playing.

3 Track number indicator

4 PLAY/PAUSE indicator

5 S.Rtrv indicator

Appears when Sound Retriever function is

on.

6 Song time (progress bar)

7 Play time indicator

Playing a CD/CD-R/CD-RW

1 Insert the disc into the disc loading slot with

the label side up.

Ejecting a CD/CD-R/CD-RW

1 Press h (eject).

Playing songs on a USB storage device

1 Use a Pioneer USB cable to connect the USB

storage device to the unit.

! Plug in the USB storage device using the USB

cable.

Stopping playback of files on a USB storage de-

vice

! You may disconnect the USB storage device at

any time.

Selecting a folder

1 Press

Selecting a track

1 Turn LEVER.

Fast forwarding or reversing

1 Turn and hold down LEVER to the right or left.

Returning to root folder

1 Press and hold BAND/ .

Switching between compressed audio and CD-DA

1 Press BAND/ .

Switching between playback memory devices

You can switch between playback memory devices

on USB storage devices with more than one Mass

Storage Device-compatible memory device.

1 Press BAND/ .

! You can switch between up to 32 different

memory devices.

Notes

! When playing compressed audio, there is no

sound during fast forward or reverse.

! Disconnect USB storage devices from the

unit when not in use.

Displaying text information

Selecting the desired text information

1 Press

/DISP.

Notes

! Depending on the version of iTunes used to

write MP3 files to a disc or media file types,

incompatible text stored within an audio file

may be displayed incorrectly.

! Text information items that can be changed

depend on the media.

Selecting and playing files/

tracks from the name list

Press

(list) to switch to the file/track

name list mode.