Pioneer DEH-X7800DAB Panduan Pemilik - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penerima Pioneer DEH-X7800DAB. Pioneer DEH-X7800DAB 28 halaman.
Halaman Cetak
Frequently used operations
The available buttons vary depending on the unit.
Purpose
Turn on the power*
Adjust the volume
Select a source
Change the display information
Return to the previous display/list
Return to the normal display from the menu Press and hold BAND/
Answering/ending a call
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.
Display indication
The following indication may vary depending on the unit.
Indication
Description
Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth telephone is connected to this unit by HFP
(Hands Free Profile) (page 9) and flashes while the telephone is on hold.
Appears when a Bluetooth audio player is connected to this unit by A2DP
(Advanced Audio Distribution Profile) (page 9).
Appears when the
Appears when a traffic program is received.
Appears when the TA (traffic announcements) function is set (page 16).
Appears when the sound retriever function is set (page 16).
Appears when random/shuffle play is set (except when BT AUDIO is
selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the
source).
Appears when the iPod control function is set (page 9).
Appears when a Bluetooth connection is made (page 9).
4
En
Operation
Press SRC/OFF to turn on the power.
Press and hold SRC/OFF to turn off the
power.
Turn the M.C. dial.
Press SRC/OFF repeatedly.
Press DISP repeatedly.
Press BAND/
.
.
Press
.
button is pressed.
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Detach
Important
• Avoid subjecting the front panel to excessive shock.
• Keep the front panel out of direct sunlight and high temperatures.
• Always store the detached front panel in a protective case or bag.
Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Remove the front panel (page 4).
2
Press the RESET button with a pointed instrument longer than 8 mm.
Setup menu
When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
Autogoods "130"
Attach
RESET button