Pioneer DVH-865AVBT Panduan Pengoperasian - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penerima Pioneer DVH-865AVBT. Pioneer DVH-865AVBT 40 halaman. Dvd av receiver
Halaman Cetak
Operating this unit
Selecting subwoofer off to activate rear line-
out.
Sub Volume:
Select subwoofer volume: 0 to 33.
• Sub Volume couldn't be adjusted when
SubWoofer Off is selected.
Radio
LOC DX:
Select radio local or distant.
LOC: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
can be received.
Stereo / Mono:
Select FM stereo or mono.
FM Step(FM tuning step):
Select FM step 50kHz or 100kHz
seek tuning step
• The tuning step remains at 50kHz during
manual tuning.
AM Step:
Select AM step 9kHz or 10kHz
The AM tuning step can be switched
between 9kHz and 10kHz.
Bluetooth
Bluetooth:
If the Bluetooth is setting is On, then the
BT will be available , otherwise the BT will
never work and in disable status.
Connect:
If the Connect is set to Auto, then BT of
the unit will connect automatically with the
HFP device which is already paired in every
disconnect status (Bluetooth must be "On").
Auto Answer:
If the Auto Answer is set to Auto, then
BT of the unit will answer the in-coming
call automatically when the BT is already
connected with your HFP device( Bluetooth
must be "On"), otherwise you have to
answer the in-coming call by press answer
button of the remote or panel.
Pairing Code:
Change the pin code by the remote control.
Default pin code is "1234".
Audio setting
AUDIO SETTING
POWERFUL
+6
+4
Press the [SEL] button to enter audio setting
menu. First press shows current EQ. Press
[
] / [
] button on the remote control to
changes EQ in this order:
POWERFUL -> NATURAL -> VOCAL
-> CUSTOM -> FLAT->SUPERBASS
To set user definition, press [SEL] button
or [ • ] (Left) / [ • ] (Right) button on the front
panel or [
] / [
] button on the remote
control to select it including: BAS(bass)/
MID(middle)/TRE(treble)/BAL(balance)/
FAD(fader), press [
remote control to adjust value.
Video setting
VIDEO SETTING
BRI
CON
At Audio setting menu, press [SEL] button
or [ • ] (Left) / [ • ] (Right) button on the front
panel or [
] / [
] button on the remote
control to select it including: BRI(brightness)/
CON(contrast)/SAT(saturation), press [
/ [
] button on the remote control to adjust
value.
* Rear monitor is not adjustable.
Note
Video setting is adjustable for this product
display only, it is not adjustable when video
output to the other devices display.
] / [
] button on the
SAT
]
En
Section
03
23