Pioneer Elite VSX-51 Panduan Petunjuk Pengoperasian - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Pioneer Elite VSX-51. Pioneer Elite VSX-51 49 halaman. 7.1-channel a/v receiver featuring airplay, dlna certified (1.5), internet radio with vtuner, made for ipad certification and 2-zone audio and video
Juga untuk Pioneer Elite VSX-51: Spesifikasi (2 halaman)
Halaman Cetak
REAR PANEL FACILITIES
@: FM/AM ANTENNA terminals
Use these antenna terminals for reception of normal FM and AM
broadcasts.
@) GND terminal
Connect the tumtable ground fead to this terminal.
@ PHONO input jacks
Connect to the output cables from a turntable.
() CD input jacks
Connect to the output jacks of a compact disc player.
@) TAPE 1/DAT jacks
Use these to connect the first cassette deck or first DAT (digital audio
tape) deck.
Connecting for Recording
The tape recarding jack (REC) on the cassette deck or DAT should be
connected to the REC side of the TAPE 1/DAT jack on the receiver with
a pin plug connecting cord.
Connecting for Playback
Connect the PLAY jack on the cassette deck or DAT to the PLAY side
of the TAPE 1/DAT jack on the receiver with a pin plug connecting cord.
(©) TAPE 2 MONITOR jacks
Connect the second cassette deck to these jacks.
Connecting for Recording
The tape recording jack (REC) on the cassette deck should be connected
to the REC side of the TAPE 2 MONITOR jack on the receiver with a
pin plug connecting cord.
Connecting for Playback
Connect the TAPE PLAY jack on the cassette deck to the PLAY side
of the TAPE 2 MONITOR jack on the receiver with a pin plug connecting
cord.
@ VIDEO OUT (TV MONITOR) jack
Connect to monitor TV or to TV sets with video input terminals for
watching program materials from a VCR 1, 2 or LD player connected
to this unit.
@LD jacks
{VIDEO IN}
When watching the video image from a LD player, connect its VIDEO
OUTPUT jacks here.
[AUDIO IN (L, Ri}
When playing back the audio channel from a LD player, connect its
AUDIO OUTPUT jacks here.
@VCR 1 jacks
{VIDEO OUT]
When copying program materia! from the video component connected
to the VCR 2 or LD jacks, connect to the VIDEO INPUT jacks of the
VCR used for recording.
{AUDIO OUT {L, R})
When copying program material from the video component connected
to the VCR 2 or LD jacks, or when recording music from an audio
component source, connect to the AUDIO INPUT jacks of the VCR used
for recording.
[VIDEO IN]
When monitoring the video image from a VCR used for playing, connect
its VIDEO OUTPUT jacks here.
[AUDIO IN (L, RH
When
monitoring the audio channel from a VCR used for playing,
connect its AUDIO OUTPUT jacks here.
16
<ARBI318>
@ VCR 2 jacks
{VIDEO OUT]
When copying prograrn material from the video component connected
to the VCR 1 or LD jacks, connect to the VIDEO INPUT jacks of the
VCR used for recording,
{AUDIO OUT {L, R}}
When copying program materials from the video component connected
to the VCR
1 or LD jacks, or when recording music from an audio
component source, connect to the AUDIO INPUT jacks of the VCR used
for recording.
[VIDEO IN}
When monitoring the video image from a VCR used for copying, connect
its VIDEO OUTPUT jacks here,
[AUDIO IN {L, R)}j
When monitoring the audio channel from a VCR used for copying,
connect its AUDIO OUTPUT jacks here.
@) REAR SPEAKERS terminals
Connect the rear speakers to these terminals.
NOTE:
Do not allow any of the cord's conductors to protrude from the terminals
or touch any other conductors. Malfunctioning or breakdowns may
occur when conductors came into contact with each other.
Use rear speakers of impedance
89 -
162.
@ CONTROL IN/OUT jacks
IN: Connect this jack to other Pioneer components (main unit or remote
control unit) when using those components to control this unit,
OUT: Connect this jack to other Pioneer components when using the
remote control of this unit to control the other components.
NOTE:
The receiver's remote sensor does not function when a plug is inserted
in IN jack. To operate, point the remote control unit at the remote sensor
on the component to which the receiver's IN jack is connected.
When using the
MR- 7100
Receiver
Pioneer component
bearing the
mark,
T
Remote
To the CONTROL IN
control
jack of the Pioneer
unit
component bearing
the
a
mark.
Remote control unit
@3 MULTI-ROOM
REMOTE IN jack
Connect to the separately sold MR- 100 Muiti-Room remote control unit.
@ CENTER SPEAKER terminals
Connect the center speaker to these terminals.
NOTE:
De not allow any of the cord's conductors to protrude from the terminals
or touch any other conductors. Malfunctioning or breakdowns may
occur when conductors come into contact with each other.
Use center speakers of impedance 8 2-16 2.