Pioneer Elite VSX-51 Panduan Petunjuk Pengoperasian - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Pioneer Elite VSX-51. Pioneer Elite VSX-51 49 halaman. 7.1-channel a/v receiver featuring airplay, dlna certified (1.5), internet radio with vtuner, made for ipad certification and 2-zone audio and video
Juga untuk Pioneer Elite VSX-51: Spesifikasi (2 halaman)
Halaman Cetak
PRESET TUNING
Last station memory
When the POWER
switch is pressed to turn the power on, the last
station received before the power was previously turned off will be
tuned in again.
When the power is ON, if the BAND FM/AM button is pressed, the last
station
received
before the BAND
FM/AM
button was previously
pregsed will be tuned in again.
MEMORY SCAN
=>
"|
Reception of consecutive broadcast stations memorized in STATION
CALL buttons (each station is received for about five seconds).
You can scan ail stations, or just the stations memorized in the custom
memory.
[Scanning the genres in the custom memory]
1. Display the desired genre using the CUSTOM MEMO SEL button.
2. Press the SCAN button,
[Scanning all the stations memorized in STATION CALL
buttons]
During TUNER display, press the SCAN button.
| NAMING A STATION
sae
lf desired, you may memorize station call-letters and display them. In
this case, use the call-letter mode.
Memorizing with the call-letter mode
* A maximum of four characters can be memorized.
1, Press the POWER switch to the ON position,
2. Tune in the desired station.
® If the desired station already has a STATION CALL No. assigned,
select it using the appropriate STATION CALL button.
* tf you wish to preset the station and input the station cail letters,
use DIRECT ACCESS TUNING or the TUNING buttones to select
the desired station.
3, Press the NAME button to put the receiver in the call-letter mode.
4. Press the TUNING (+, -} buttons to select the desired characters.
« When the '' +'' of the TUNING button is pressed, the characters
will change in order, in the direction of the arrow. When the *"~
is pressed, the characters will change in reverse direction of the
arrow.
Cy:
ey
Za
"
5. Press the MEMORY button.
* The first character selected will be memorized and the operation
will move to the next character. In this case, the same character
as that previously set will be displayed flashing.
6. By repeating steps 4 and 5 up to four characters can be memorized.
* If you used one of the STATION CALL buttons to tune in the
broadcast, the station calltetters you just input will be memorized
along with the station no.
24
<ARBI318>
NOTE:
if the FUNCTION buttones are pressed, the setting procedure will be
interrupted and setting will be aborted.
Returning to the TUNER display.
1) Use the STATION CALL buttons to select a station.
2) Use the TUNING (+, ~} buttons to change the received frequency.
* The station name will change to "TUNER."
3) Use the TUNING
(+, —} buttons to change back to the previous
frequency.
4) Store in memory under the previously selected station number.
* Refer to the 'PRESET
TUNING"
section for the memory storage
procedure.
a
nn
| Example: To set the name "SOUL"
into STATION CALL button
CH 3,
Select CH 9 (Press [+9] once.)
®
r
—
zs
=
vn
j
Start: Wait about one second (once started, ''A'' will appear).
®
Go on and off
-
eS
Go on and off
MEMORY
@
Repeat the operation for the other characters.