Pioneer VSX-330-K Panduan Petunjuk Pengoperasian - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Pioneer VSX-330-K. Pioneer VSX-330-K 36 halaman.
Juga untuk Pioneer VSX-330-K: Panduan Memulai Cepat (25 halaman)
Halaman Cetak
5
5
Note
•
If you are using a Sound Pressure Level (SPL) meter, take
the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow
reading).
•
The subwoofer test tone is output at low volumes. You may
need to adjust the level after testing with an actual
soundtrack.
6
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
Tip
•
You can change the channel levels at any time by press
, then press
CH SELECT
and
RECEIVER
remote control. You can also press
CH SELECT
to select the channel, and then use
channel levels.
Speaker Distance
For good sound depth from your system, you need to specify
the distance of your speakers from the listening position. The
receiver can then add the proper delay needed for effective
surround sound.
•
For the assignment of the digital signal inputs, see
Selecting the audio input signal on page
1
Select 'Manual SP Setup' from the Home Menu.
2
Select 'Speaker Distance' from the Manual SP Setup
menu.
1.Manual SP Setup
1d.Speaker Distance
a.Speaker Setting
Front L
b.X.Over
Center
Front R
c.Channel Level
d.Speaker Distance
Surround R
Surround L
Subwoofer
Return
3
Adjust the distance of each speaker using /.
You can adjust the distance of each speaker in 0.03 m
increments.
4
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
The Input Assign menu
(CD) audio input terminal is assigned to CD under factory
settings, but this can be changed to TV input.
1
Select 'Input Assign' from the Home Menu.
LEV +/–
on the
and use
/
/
to adjust the
2
Select 'Analog Input' from the Input Assign menu.
2.Input Assign
a.Analog Input
18.
3
Select the desired input option for the (CD) audio input
terminal.
3 m
4
When you're finished, press RETURN.
[
3 m
]
[
3 m
]
[
3 m
]
You return to the Input Assign menu.
[
3 m
]
[
3 m
]
Return
Ho me Me nu
1.Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
R etu rn
2a.Analog Input
Analog
CD
Return
Return
29
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
•
Default setting: 6H
1
Select 'Auto Power Down' from the Home Menu.
H ome Me nu
3.Auto Power Down
1.Manual SP Setup
Auto Power Down
2.Input Assign
3.Auto Power Down
4.HDMI Setup
Re turn
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
•
You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you're finished, press RETURN.
You return to the Home Menu.
Home Menu
4
6
31
6H
Return