Pioneer VSX-524-K Panduan Petunjuk Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Pioneer VSX-524-K. Pioneer VSX-524-K 40 halaman. Av receiver
Juga untuk Pioneer VSX-524-K: Panduan Petunjuk Pengoperasian (38 halaman), Panduan Memulai Cepat (21 halaman), Panduan Memulai Cepat (21 halaman), Panduan Petunjuk Pengoperasian (40 halaman)

Halaman Cetak

Pioneer VSX-524-K Panduan Petunjuk Pengoperasian

Connecting your equipment

Connecting an iPod

This receiver has a dedicated iPod/iPhone terminal that will

allow you to control playback of audio content from your iPod

using the controls of this receiver.

Note

• An iPod/iPhone can be connected to the receiver. For

details on supported models and versions of the

respective products, see Playing an iPod on page 24.

Switch the receiver into standby, and then use the iPod

cable to connect your iPod to the iPod/iPhone terminal on

the front panel of this receiver.

• For the cable connection, also refer to the operating

instructions for your iPod.

• When connecting an iPhone to this unit, keep the iPhone

at least 20 cm away from this unit. If the iPhone is kept

closer to this unit and a telephone call is received by the

iPhone, noise may be output from this device.

• iPod recharging occurs whenever an iPod is connected to

this unit. (Recharging is enabled only when the unit's

power is turned on.)

• For instructions on playing the iPod, see Playing an iPod

on page 24.

USB cable that comes

with the iPod

iPod/iPhone

Note

• When the ARC function is ON and the receiver is

connected to a compatible TV with an HDMI cable, and

you switch the input of the TV when the receiver's

selection is iPod/USB input, the receiver may

automatically switch to TV. If this happens, switch the

receiver's input back to the original input, or turn OFF the

ARC function (see The HDMI Setup menu on page 35).

Connecting a USB device

It is possible to listen to two-channel audio using the USB

interface on the front of this receiver.

Switch the receiver into standby then connect your USB

device to the iPod/iPhone terminal on the front panel of

this receiver.

• This receiver does not support a USB hub.

• For instructions on playing the USB device, see Playing a

USB device on page 25.

This receiver

storage device

This receiver

USB mass