Pioneer VSX-531 Panduan Petunjuk Pengoperasian - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Pioneer VSX-531. Pioneer VSX-531 37 halaman.
Juga untuk Pioneer VSX-531: Panduan Memulai Cepat (25 halaman), Panduan Memulai Cepat (25 halaman)
Halaman Cetak
4
4
Setting/What it does
a
S.RTV (Sound Retriever)
Switches on/off the effect of Sound Retriever.
(see
Using the Sound Retriever on page
24)
c
DUAL MONO
Specifies how dual mono encoded Dolby
Digital soundtracks should be played.
d
F.PCM (Fixed PCM)
This is useful if you find there is a slight delay
before OFF recognizes the PCM signal on a
CD, for instance.
When ON is selected, noise may be output during
playback of non-PCM sources. Please select
another input signal if this is a problem.
DRC (Dynamic Range Control)
Adjusts the level of dynamic range for movie
soundtracks optimized for Dolby Digital, DTS,
Dolby Digital Plus, Dolby TrueHD, DTS-HD
and DTS-HD Master Audio (you may need to
use this feature when listening to surround
sound at low volumes).
LFE ATT (LFE Attenuate)
Some Dolby Digital and DTS audio sources
include ultra-low bass tones. Set the LFE
attenuator as necessary to prevent the ultra-
low bass tones from distorting the sound from
the speakers.
The LFE is not limited when set to 0 dB,
which is the recommended value. When set
to –15 dB, the LFE is limited by the
respective degree. When OFF is selected, no
sound is output from the LFE channel.
f
SACD G. (SACD Gain)
Brings out detail in SACDs by maximizing the
dynamic range (during digital processing).
Option(s)
Setting/What it does
b
HDMI (HDMI Audio)
OFF
Specifies the routing of the HDMI audio
ON
signal out of this receiver (AMP) or through to
a TV (THRU). When THRU is selected, no
CH1 – Channel 1
sound is output from this receiver.
is heard only
A.DLY (Auto Delay)
CH2 – Channel 2
This feature automatically corrects the audio-to-
is heard only
video delay between components connected
CH1 CH2 – Both
with an HDMI cable. The audio delay time is set
channels heard
depending on the operational status of the
from front
display connected with an HDMI cable. The
speakers
video delay time is automatically adjusted
according to the audio delay time.
OFF
ON
C.WIDTH (Center Width)
(Applicable only when using a center speaker)
Spreads the center channel between the front right
and left speakers, making it sound wider (higher
settings) or narrower (lower settings).
Making the C.WIDTH setting "7" may cause no
sound to be output from the center channel.
e
AUTO
MAX
DIMEN. (Dimension)
Adjusts the surround sound balance from
MID
front to back, making the sound more distant
OFF
(minus settings), or more forward (positive
settings).
PNRM. (Panorama)
0 (0 dB)
Extends the front stereo image to include
5 (–5 dB)
surround speakers for a 'wraparound' effect.
10 (–10 dB)
C.IMG (Center Image)
15 (–15 dB)
(Applicable only when using a center speaker)
20 (–20 dB)
Adjust the center image to create a wider
stereo effect with vocals. Adjust the effect
** (OFF)
from 0 (all center channel sent to front right
and left speakers) to 10 (center channel sent
to the center speaker only).
a.
You can change the Sound Retriever feature at any time by
0 (0 dB)
S.RETRIEVER
using
+6 (+6 dB)
b.
The default setting when the USB input is selected is ON.
c.
This setting works only with dual mono encoded Dolby Digital
and DTS soundtracks.
Option(s)
AMP
THRU
OFF
g
ON
h
0 to 7
Default: 3
h
–3 to +3
Default: 0
h
OFF
ON
i
0 to 10
Default: 3
(NEO:6 MUSIC),
10 (NEO:6
CINEMA)
button.
25
Listening to your system
d.
This is not displayed by default. You need to change some
settings on this unit to display the menu. (see
Fixed PCM Setting menu on page
26).
e.
The initial set AUTO is only available for Dolby TrueHD signals.
Select MAX or MID for signals other than Dolby TrueHD.
f.
You shouldn't have any problems using this with most SACD
discs, but if the sound distorts, it is best to switch the gain
setting back to 0 dB.
g.
This feature is only available when the connected display
supports the automatic audio/video synchronizing capability
('lip-sync') for HDMI. If you find the automatically set delay
time unsuitable, set A.DLY to OFF and adjust the delay time
manually. For more details about the lip-sync feature of your
display, contact the manufacturer directly.
h.
Only available with 2-channel sources in DOLBY PLII MUSIC mode.
i.
Only when listening to 2-channel sources in NEO:6 CINEMA
and NEO:6 MUSIC mode.
2
Displaying the
4
27