Pioneer VSX-C502-S Petunjuk Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Penerima Pioneer VSX-C502-S. Pioneer VSX-C502-S 49 halaman. Audio/video multi-channel receiver

Halaman Cetak
Connecting your equipment
03

Connecting a DVD player

Follow the instructions below, referring to the diagram, to
connect a DVD player.
If your DVD player has multichannel analog audio
outputs you can connect them to the AUDIO IN (5.1CH)
jacks on this receiver. Connecting these can be useful as
some discs do not allow digital output from the player. It
can also be useful if you want to use an external digital
decoder unit.
1
Use a stereo audio cable to connect the
FRONT L / R DVD IN jacks to the stereo or front left/
right audio outputs on your DVD player.
If your DVD player has only stereo analog audio outputs,
the jacks are probably labelled something like AUDIO
OUT L / R. If your DVD player has multichannel analog
outputs, use the FRONT L / R jacks.
2
If your DVD player has multichannel analog
outputs, connect these to the SURROUND L / R,
CENTER and SUBWOOFER jacks on this receiver.
These connections are shown in 2 in the illustration
below.
VSX-C502
.
10
En
ANTENNA
AM LOOP
+
–
R
L
CENTER
R
L
SURROUND
FRONT
SURROUND
BACK
SUB
TV/SAT
SPEAKERS
(DVD)
WOOFER
OUT
OPT1
3
2
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
DVD player
3
Use a coaxial digital audio cable to connect the
DVD(TV/SAT) COAX jack to a coaxial digital audio
output on your DVD player.
This connection carries stereo and multichannel digital
audio.
If your DVD player doesn't have a coaxial digital audio out
jack, it is possible to use an optical connection to the TV/
SAT(DVD) OPT1 jack. However, since by default this
input is assigned to the TV/SAT input, you will need to
reassign it to the DVD input before you can use it. After
connecting up everything else see Optical input setting
on page 36 for how to do this.
4
Use a video cable to connect the DVD VIDEO IN
jack on this receiver to your DVD players video
output.
This connection is shown in 1 in the illustration below.
Note
• To listen to multichannel analog audio you'll need to
switch the input signal selector to DVD 5.1ch
(multichannel analog). See Selecting the input signal
type on page 32.
VIDEO
FM UNBAL 75Ω
OUT
IN
CONTROL
IN
IN
IN
OUT
IN
CENTER
SURROUND
FRONT
L
L
L
DIGITAL IN
R
R
R
DVR/VCR
DVD
SUB WOOFER
DVD
TV/SAT
DVR/VCR
VIDEO
(TV/SAT)
AUDIO IN (5.1CH)
COAX
OPT2
AUDIO
1
VIDEO
CENTER
L
R
SUB W.
SURR.
FRONT
TWO VOLTAGE SELECTORS
AC IN
MONITOR
OUT
220 -230V
240V
110V
120-127V
110V
220 -230V
120 -127V
240V