Pioneer VSX-C502-S Petunjuk Pengoperasian - Halaman 32

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Penerima Pioneer VSX-C502-S. Pioneer VSX-C502-S 49 halaman. Audio/video multi-channel receiver

Halaman Cetak

Using other functions

Chapter 8

Using other functions

Selecting the input signal type

The DVD, TV/SAT, DVR/VCR and FRONT inputs all have

both analog and digital jacks. You can select the type of

signal to be used in each case. The DVD input has a third

option; multichannel analog input.

The input signal type for the current input is indicated in

the display: ANA (analog), DIG (digital), and DVD 5.1ch

(multichannel analog).

The default AUTO setting is usually sufficient, letting the

receiver decide the most suitable signal type. However, if

you want to record from the DVR/VCR IN/OUT jacks,

then you should set the input signal type to analog.

•

Press SIGNAL SEL to change the input signal type.

• SEL. AUTO – (default setting) Uses digital if available,

otherwise analog.

• SEL. ANA – Uses the analog signal

• SEL. DIG – Uses the digital signal

• SEL. 5.1ch – Uses the multichannel analog signal

(only selectable for the DVD input)

Note

• When the VIDEO or FM/AM inputs are used, the

display always shows ANA (analog).

• When DVD 5.1ch (multichannel analog) is selected,

only the volume and channel level settings are

applied to the sound; you cannot use the Stereo,

Surround, Advanced Surround modes, Sound Modes

and dialog enhancement. (If you want to use these,

select DIG (digital) as the input signal type.

• MCACC setup is not usable when DVD 5.1ch is

selected. Switch to one of the other settings if you

want to use MCACC setup.

SIGNAL SEL

Using the sleep timer

The sleep timer automatically puts the receiver into

standby after the specified period of time.

RECEIVER

Press RECEIVER.

Press SLEEP to set the sleep timer.

Press repeatedly to select between:

• 90 MIN. – Switches to standby after 90 minutes

• 60 MIN. – Switches to standby after one hour

• 30 MIN. – Switches to standby after 30 minutes

The sleep timer indicator (

has been set.

Tip

• Press the SLEEP button once to view how much time

is left on the timer before shutdown. Each press after

that will cycle through the possible sleep time

lengths.

SLEEP

) lights when the sleep timer