Ariston A1637 Buklet Instruksi - Halaman 7

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci Ariston A1637. Ariston A1637 12 halaman. Ariston instruction manual washing maching a1637,a1437,a1237

Ariston A1637 Buklet Instruksi

Personalisation

Setting the temperature

Turn the TEMPERATURE knob to set the wash
temperature (see Programmes Table).
The temperature can be lowered, or even set to cold
wash (
).
Setting the spin speed
Turn the SPIN SPEED knob to set the spin speed for
the programme selected.
The maximum spin speeds for each programme are
as follows:
Programmes
Cotton
Synthetics
Wool
Silk
Function table
Option
Effect
Delays the start
of the wash by
up to 9 hours.
Delay Timer
Allows for an
impeccable
wash, visibly
whiter than a
Super Wash
standard
Class A wash.
This option
reduces the
amount of
Easy Iron
creasing on
fabrics, making
them easy to iron.
Cuts the duration
of the wash cycle
by 30%.
Rapid
Adds one extra
rinse cycle.
Extra Rinse
Maximum spin speed
1600rpm - Model A1637
1400rpm - Model A1437
1200rpm - Model A1237
800rpm
600rpm
no
Comments
Press the button repeatedly until the LED corresponding to the
desired delay is turned on.
The fifth time the button is pressed, the function will be disabled.
N.B. Once you have pressed the START/RESET button, the
delay can only be decreased if you wish to modify it.
This function is incompatible with the RAPID function.
When this function is set, programmes 6, 7, 8, 11 and Delicate
rinse will end with the laundry left to soak (Anti-crease) and the
Rinse cycle phase LED
- to conclude the cycle, press the START/RESET button.
- to run the draining cycle alone, set the knob to the relative
symbol
and press the START/RESET button.
This function is incompatible with the SUPER WASH
function.
Remember - you will use more water than with a standard
cycle.
The spin speed can be lowered, or the spin cycle can
be excluded altogether by selecting symbol
The washing machine will automatically prevent you
from selecting a spin speed higher than the maximum
speed for each programme.

Functions

To enable a function:
1. press the button corresponding to the desired
function, according to the table below.
2. the function is selected when the corresponding
LED is illuminated.
! The rapid flashing of the LED indicates that the
corresponding function cannot be selected for the
programme set.
will flash.
GB
.
Available with
programmes
All
1,2,3,5,6,7,8.
All
programmes
except for
1,2,4,9,10 and
Draining
1,2,3,5,6,7,8.
1,2,3,4,5,6,7,8.
(Model A1237
only)
7