Ariston aqualtis aq113d 697d Petunjuk Instalasi dan Penggunaan Manual - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Penggunaan Manual untuk Mesin cuci Ariston aqualtis aq113d 697d. Ariston aqualtis aq113d 697d 12 halaman.

Halaman Cetak

Running a wash cycle

WARNING: before you use the washing machine for the

first time, run a wash cycle with detergent and no laundry,

using the 90° cottons cycle without pre-wash.

1. SWITCH THE MACHINE ON. Press the

the indicator lights will illuminate for 1 second and the

text AQUALTIS will appear on the display; the indicator

light corresponding to the

a constant manner and the START/PAUSE indicator light

will flash.

2. SELECT THE PROGRAMME. Turn the PROGRAMME

KNOB left or right, until the required programme has

been selected; the name of the programme will appear

on the display. A temperature and spin speed is set for

each programme; these may be adjusted. The cycle

duration will also appear on the display.

3. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed the

maximum load value indicated in the table of wash

cycles on the following page.

4. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in "Description

of the machine".

5. CLOSE THE PORTHOLE DOOR.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons on the control panel:

Modify the temperature and/or spin speed.

The machine automatically displays the maximum

temperature and spin speed values set for the selected

cycle, or the most recently-used settings if they are

compatible with the selected cycle. The temperature can

be decreased by pressing the

wash "OFF" setting is reached. The spin speed may be

progressively reduced by pressing the

it is completely excluded "OFF". If these buttons are

pressed again, the maximum values are restored.

Exception: if the

temperature can be increased up to a value of 90°C.

Setting a delayed start.

To set a delayed start for the selected cycle, press the

corresponding button repeatedly until the required delay

period has been reached. During the setting procedure,

the delay period and the text "Starts in:" will be

displayed, along with the flashing

delayed start has been set, the

fixed on the display, which will also indicate the duration

of the selected cycle with the text "Ends in:" and the

cycle duration. Press the DELAYED START button just

once to display the delay time set previously.

After the countdown has begun, the display will show

the text "Starts in:" and the delay period. Once the

set delay time has elapsed, the machine will begin its

cycle and the display will show "Ends in:" and the time

remaining until the end of the cycle.

To remove the delayed start option, press the button

until the display shows the text OFF; the

disappear.

button. All

button will then remain lit in

button, until the cold

button, until

programme is selected, the

symbol. After the

symbol will remain

symbol will

Modify the cycle settings.

• Press the button to activate the option; the name

of the option will then appear on the display and

the corresponding indicator light will illuminate.

• Press the button again to deactivate the option; the

name of the option will then appear on the display

followed by the text OFF, and the corresponding

indicator light will switch off.

! If the selected option is not compatible with the

selected wash cycle, this incompatibility will be signalled

by the flashing of the indicator light and a sound alert

(3 beeps); the option will not be activated.

! If the selected option is not compatible with another

option that has been selected previously, the indicator

light corresponding to the first option selected will

flash and only the second option will be activated; the

indicator light corresponding to the button will remain lit

in a constant manner.

! The options may affect the recommended load value and/

or the duration of the cycle.

7. START THE PROGRAMME.

Press the START/PAUSE button.

The machine will lock the door (

will start to rotate; the door will be unlocked (

and then locked again (

symbol on) as preparation phase

of each washing cycle. The "Clicking" noise is part of the

door locking mechanism. Water will enter the drum and start

the washing phase once the door is locked.

The icons corresponding to the wash cycle phases

will light up during the cycle to indicate which phase is

currently in progress.

To change a wash cycle once it has already started,

pause the washing machine by pressing the START/

PAUSE button; then select the desired cycle and press

the START/PAUSE button again.

To open the door during a wash cycle, press the START/

PAUSE button; if the DOOR LOCKED

switched off you may open the door. Press the START/

PAUSE button again to restart the wash cycle from the

point at which it was interrupted.

8. THE END OF THE WASH CYCLE. This is indicated

by the illuminated text END. The porthole door may be

opened immediately. If the START/PAUSE indicator light

is flashing, press the button to end the cycle. Open the

door, unload the laundry and switch off the machine.

! If you wish to cancel a cycle which has already begun,

press and hold the

button until the cycle stops and the

machine switches off.

symbol on) and the drum

symbol OFF)

indicator light is