Pioneer VSX-530-K Panduan Petunjuk Pengoperasian - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Stereo Pioneer VSX-530-K. Pioneer VSX-530-K 39 halaman. Pioneer vsx-1130-k; vsx-830-k; vsx-530-k av receivers
Juga untuk Pioneer VSX-530-K: Panduan Referensi (27 halaman), Panduan Memulai Cepat (17 halaman), Panduan Servis (32 halaman)
Halaman Cetak
3
3
Manual tuning
To change the frequency one step at a time, press
TUNE
/.
High speed tuning
Press and hold
TUNE /
for high speed tuning.
Improving FM sound
If the TUNE or ST indicators don't light when tuning to an FM
station because the signal is weak, set the receiver to the
mono reception mode.
BAND
Press
to select FM MONO.
This should improve the sound quality and allow you to
enjoy the broadcast.
Saving station presets
If you often listen to a particular radio station, it's convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station. This saves the
effort of manually tuning in each time. This unit can memorize
up to 30 stations.
1
Tune to a station you want to memorize.
See
Listening to the radio above
for more on this.
2
Press TOOLS.
The display shows PRESET, then a blinking MEM and
station preset.
3
PRESET /
Press
to select the station preset you
want.
You can also use the number buttons.
4
Press ENTER.
The preset number stop blinking and the receiver stores
the station.
Note
If the receiver is left disconnected from the AC power outlet
•
for over a month, the station memories will be lost and will
have to be reprogrammed.
Stations are stored in stereo. When the station is stored in
•
the FM MONO mode, it shows as ST when recalled.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets above
if you haven't done this already.
PRESET /
Press
to select the station preset you
want.
You can also use the number buttons on the remote
•
control to recall the station preset.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1
Choose the station preset you want to name.
See
Listening to station presets above
2
TOOLS
Press
twice.
The cursor at the first character position is blinking on
the display.
3
Input the name you want.
Choose a name up to eight characters long.
Use
PRESET /
to select character position.
•
TUNE /
Use
to select characters.
•
The name is stored when
ENTER
•
24
Tip
To erase a station name, follow steps 1 and 2, and press
•
ENTER
while the display is blank. Press
display is blank, to keep the previous name.
Once you have named a station preset, Press
•
the name. When you want to return to the frequency
display, press
for how to do this.
is pressed.
Basic playback
TOOLS
while the
DISP
to show
DISP
several times to show the frequency.