Pioneer VSX-605S Panduan Petunjuk Pengoperasian
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Stereo Pioneer VSX-605S. Pioneer VSX-605S 37 halaman. Audio/video stereo receiver
Juga untuk Pioneer VSX-605S: Panduan Petunjuk Pengoperasian (37 halaman)
Halaman Cetak
Operating
Instructions
L S C Solan Cane
GD MONEIERS smo vato sranea micenen Y'SK SS
Jabigeat Symon Cone
a smscwy
AUDIO/VIDEO STEREO RECEIVER
MOK COD
Vi2270 990
lilustration shows VSX-605S,
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished
reading the instructions, put them away in a safe place for future
reference.
in some countries or regions, the shape of the power plug and
power
outlet may
sometimes
differ from that shown
in the
explanatory drawings. However the method of connecting and
operating the unit is the same.
IMPORTANT NOTICE
{For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
THE POWER SWITCH IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS
Round 2-pin AC plug model
U.S. and Canadian mode!
Multi-voltage mode!
7
PAL/NTSC
® The demonstration mode is activated by turning on the power
switch while holding down the RETURN button (from power
standby condition). The demonstration will appear on the
display. When this mode is set, SURROUND settings will be
set to the initial values.
® Press any button to cancel the demonstration.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This function returns the unit to its initial settings with the
tuner ready to receive a broadcast. This is hetpful during
troubleshooting or when no sound is output. For details, refer
| to page 14.
Set the MASTER VOLUME to minimum before pressing the
RESET button.
Use this function when normal operation is not possible due
to external influences such as static electricity or lightning, or
when operations are not functioning even when the operation
switches are pressed. Press the RESET button to return to
normal operating conditions.
|
|
|