Pioneer VSX-9500S VSX-7500S Panduan Petunjuk Pengoperasian - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penerima Stereo Pioneer VSX-9500S VSX-7500S. Pioneer VSX-9500S VSX-7500S 48 halaman.
Juga untuk Pioneer VSX-9500S VSX-7500S: Panduan Petunjuk Pengoperasian (48 halaman)
Halaman Cetak
FRONT PANEL FACILITIES
Gd FM MODE AUTO/MONO
selector switch
Use to select the auto stereo mode or monaural mode when listening
to FM broadcasts.
The monaural mode has been selected when the FM
MONDO indicator in the display section is lit,
Auto stereo mode:
Normatly, leave in this mode for reception, When a stereo FM broadcast
is received, it will be automatically reproduced in stereo.
Monaural mode:
When receiving distant stations or stations with weak broadcast signals,
the input
signal may be weak, thus resulting in increased noise during
FM stereo broadcasts.
in this event,
setting the receiver 10 the monaural
mode will reduce the noise. in this case, however,
FM stereo broadcasts
will be reproduced in monaural sound.
NOTE:
This switch has no effect on reception of AM broadcasts.
TV ANT (VIDEO/TV) selector switch
This switch can be used in place of the TV ANT switch on the RF
Modulator JA-RF5 (sold separately).
This is effective only when the
JA-RF5's TV ANT switch is set to the VIDEO position.
For example:
in VIDEO mode (TV-ANT indicator in the display section goes out):
Allows you to use video components connected ta the receiver.
In TV mode (TV-ANT indicator in the display section lights)
Connects
the TV antenna,
thus allowing you to view
normal
TV
broadcasts.
The TV mode is selected while the receiver's power is off.
NOTE:
* When in the VIDEO mode, no sound will be produced from the TV
set's speakers. Listen using the speakers connected to the receiver.
* This switch functions only when the TV ANT selector switch on the
RF Modulator is set to VIDEO."
° This switch is set to VIDEO when the power is turned on
@
STATION CALL RANDOM
30 CH switches
Station call operation example:
If you press the [*2] key:
* One time — station 2 is selected.
* Two times — station 12 is selected.
» Three times — station 22 is selected.
NOTE:
* They are also used when performing direct access tuning.
@
RETURN switch
Pressing this switch returns the receiver to the following settings, the
sound level being controlled by MASTER VOLUME
control knob.
* TAPE
2 MONITOR
OFF
¢ SURROUND
MODE
FF
* SPEAKERS
A
ON
* MUTING
OFF
* FRONT
BALANCE
CENTER
* FUNCTION
TUNER
* STATION CALL
1CH
*
* VIDEO ADAPTOR
OFF
* When a station is not memorized in 1 CH, station search will
automatically proceed from the frequency displayed.
06®. ©
VSX-7500S
es
©
om ==)
OBO®OOD
2©@@®
©
©
29
<ARB1173>